Re: Which rotors to cure pulsating?
Use some PB Buster and some good even wacks from behind the rotors. It will gradually walk out off the hub.
Before yu install your new rotors...steel brush any excess rust and corrosion...then apply Anti-Sieze to the hub and new rotors where they will contact. Yu will have no issues removing them in the future.
BTW, if yu have alloy wheels ...put a light coat of antisieze onto the backside torque ring of the rims where they will meet the hub.
I personally like to put a very small drop of the same on my lug nut studs too. Just using Anti-sieze once in this manner will last for many years and your rims will not freeze onto your hub.
This is most critical for winter salted regions.
LT
|