Got the unichip this afternoon and installed it right off in the 100* sun. Had to remove the TRD airbox and looosen the black box between the air box and ecu to have room to install the plugs. Got it all installed and in my excitement forgot to plug in the maf senor and as a result, got cel. Also had the traction control light flashing along with the 4lo light. Plugged in the maf and went to pick up the gf with the lights still flashing.
It seemed that the engine reved more freely and although I didnt get on it to hard, the accelleration seemed better also. (the 600 bucks I spent on it may have influanced my perception) Too soon to tell about milage of course
Now how do I reset the cel and other lights? I may be forced to read the rest of the instructions
First impressions are improved performance, but nothing overwhelming. I am on the low octane map at the moment. May go out after a shower and dinner to get better fuel and try some harder runs. Any opionions about octane boosters?
__________________
2007 Tundra DC SR5 5.7 4X4 Superwhite & debadged
Truxxx 3 & 1 lift <> Tuned Unichip <> Gibson single cb exhaust <> TRD CAI <> Aries side bars <> Carriage Works replacement grill <> TRD sway bar