Re: Worklog - Road RagE II (2007 Tundra)
Justin, note that RAGE indicated he used a 100ohm(R1) and a 200/220ohm(R2) resistors = 520ohms, versus the 420 you indicated using. Add another 100 (or replace the 100 with a 200 - to mirror RAGE's install) and tell us the results. 
http://www.national.com/ds/LM/LM117.pdf
Quote:
Originally Posted by JStirfry
I followed what I thought was the exact same procedure you showed above for the voltage regulator and resistors and my voltage is coming out to be approx. 4.63V....any suggestions? I used an LM317T (is that different from an LM317?), one 220-ohm and two 100-ohm resistors just as you have shown in the pics.
|
__________________
---Michael---
2007 Toyota Tundra 5.7L DCRB Limited 4x2 TRD - Slate/RedRock
Performance: TRD intake and exhaust; Hellwig adj. rear swaybar; Interior: Door sill protectors, WeatherTech liners, All-weather mats, Bedrug; Exterior: Truxedo Deuce bed cover, Spare tire lock; Mods: Shaved emblems
Last edited by Targamond; 09-16-2008 at 01:28 PM.
|