Quote:
Originally Posted by vtcooter
any body that mounts there amps back there after this mod notice that your amps won't let the seat lock in the upright position because the seat backs are hitting the amps.
any one know of a solution, i doubt there is much I can do.
|
I have my two amps mounted back there on a piece of 1/2" MDF. The MDF combined with the height of the amps still leaves me plenty of room for the seats to fully close and lock. At first attempt they were rubbing on one of the support bars that sticks out along the back of the seat, but a bit of re-measuring and I found I needed to lower the amps a bit on the amp rack. Because the seat is tapered, you have more room the lower you go. The seats went back in with no problems and the hook bracket mod works perfect.
