Quote:
Originally Posted by twistedjosh
Awesome setup......A+ , I was looking to do something similar on my 08 Double Cab. Was wandering if you had the dimensions used for the MDF on the amp wall? And if you had any trouble with the back seats during the install, either sitting flush or the ability to access the amps for adjustment?
|
Sorry I took so long to get to this Josh. The amp rack is roughly 51 1/2" wide by 24 1/2" high. Just measure out the width from trim panel to trim panel and for height do the floor to the upper lip of the back wall.
I have no problems with the amps clearing the seat backs, they have plenty of room. When I put the new JL amps in I'll be building a cover panel to hide the wires and give it more of a professional look.
I did the back seat mod last year so I have total access to the amps for tuning.
Heres the clearance. Again, sorry I forgot to get this to you sooner.
