[Theohiomike]

Yes in the rear bin unseen. I tried to get them under the rear seat but they were about 1/2 inch to wide. There is a ton of room back there and my crossovers and distribution block are under the rear seat as of now. I cut a small hole in the Jack area lid for the wires. I figured I could always replace that part relatively inexpensive if need be. I used construction grade Velcrow on the back side of the amps to mount them. They don't move at all. Its hard to even lift them out that stuff is so strong. Jl audio Hd series 600x4 and 750x1 with zr series speakers and w3 10" sub. Sounds awesome