Quote:
Originally Posted by eadblu
The driver side front pillar airbag cover on my 2007 Camry is falling off or loosening every time I drive a bumpy road. I just push it back but will come loose again. Has anyone had that problem? I heard that there is a TSB out on this to replace a clip. What is the TSB number?
|
BO015-06 RH INTERIOR A-PILLAR GARNISH LOOSE
7/28/2006 - 2007 model year NAP-built Camry vehicles produced BEFORE the Production Change Effective VINs shown
Some customers may complain that the right side interior A-pillar garnish is
loose or out of position. This condition is caused by an incomplete installation of the A-pillar garnish at the factory. Follow the repair procedure in this bulletin to correct this condition.
BO017-03 TRIM GARNISH LOOSE (REVISED)
4/24/2006 - 1991 – 2007 model year Toyota vehicles.
Customers may experience an interior
trim panel either
loose or fitting poorly due to a deformed or missing panel attachment clips. When a
trim garnish (A, B, C, or D pillar garnish, door
trim panel, etc.) is removed and reinstalled using the old clips, there is a possibility that the garnish may exhibit a
loose condition. To prevent this condition from occurring, please use the following procedures.