[Big Vic]

I have searched and read the threads on this topic and have not found my answers to some questions. I have an 08 power mirror which is not heated. I have the 11 wire connector harness at the mirror (not the 3 wire) and the standard power mirror switch with a 9 wire connector. There is no mirror heat on switch on my console.

So...if I upgrade to the OEM toyota or aftermarket mirrors with power, heated, and turn signal, I am pretty sure that I will get the signals and power. But how is the mirror heat controlled since I do not have a dedicated mirror heat switch?

Also, does anyone have the wiring diagram to the mirror which shows which two wires go to the signaling leds?