You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
1Gen-SequoiaGeneral discussion forum for the first generation 2001 to 2007 Toyota Sequoia.
This is a discussion thread titled "Gauge Cluster Lens", within the 1Gen-Sequoia forum, part of the SUV Forums category.
My gauge cluster lens is all scratched to hell by the previous owner.
I think these are replaceable, and not too expensive.
Does anyone have experience with replacing these or messing with the gauge cluster in general?
I am mainly interested in opinions on the difficulty of messing with it.
Just to be clear I am referring to the plastic piece that covers the speedo, tach etc.
My gauge cluster lens is all scratched to hell by the previous owner.
I think these are replaceable, and not too expensive.
Does anyone have experience with replacing these or messing with the gauge cluster in general?
I am mainly interested in opinions on the difficulty of messing with it.
Just to be clear I am referring to the plastic piece that covers the speedo, tach etc.
On my 2001 Tundra, it's pretty easy to remove the gauge cluster and the clear shield. You have to remove the plastic bezel around the dash area of the cluster, but aside from that and a few screws holding it on, it's a snap. If I remember right after removing my cluster about a month ago, that shield does come apart from the cluster, so you should be able to replace it pretty easily.
__________________
Waiter, how do you prepare your chickens?
Nothing special. We just tell them straight out that they're going to die.
Base: 2001 Tundra - Thunder Grey | SR5 | TRD | 4x4 | Bilstein Shocks | HD TRD Coil Springs | Tow Pkg | Factory Spray-on Bedliner | RS3000 Security
Mods: Mickey Thompson Classic II | Cornfed 2.5" Lift | Differential Drop Spacers | 930 Inner CV Boots | ProtechEZLift Limit Straps | Spintech Sportsman XL Muffler | Brembo Front Brake Rotors | A.R.E. Z-Series Cap w/ Thule Rack | Stubbs Rock Sliders | Hellwig Anti-Sway Bar | 285/75/16 BFG All Terrain TA KO's | VIAIR 400C Air Compressor w/ 2.5 gal tank | Front clear corner lamps | Odyssey PC1700T battery | Optima Red Top 75/35 battery (backup starter) | Hellroaring 95300A Isolator/Combiner | Truspeed Calibrator
Future: Winch Bumper | UCAs & Coilovers | RCD Lift | 4.30 Gears
Hey thanks for the quick reply.
I got on to Stevinson Toyota's website, and they have a really cool parts ordering page. Found the part, cost is about $68.
Called up a guy I know there in the parts department, and he is getting it for me for $24
Great bunch of guys down there.
Anyhow should be in next Tuesday, can't wait to get rid of the scratched up old lens.
Cheers!
Joe
Gauge Cluster Lens
Linear Mode
