those sway-a-ways look like they bring the truck a LOT higher in the front than my 5100's... or maybe its helped with by the UCA's? (not that the UCA's lift the truck, but allow more travel for the Coilovers to push the truck up) Thoughts??
| |
those sway-a-ways look like they bring the truck a LOT higher in the front than my 5100's... or maybe its helped with by the UCA's? (not that the UCA's lift the truck, but allow more travel for the Coilovers to push the truck up) Thoughts??
2005 Tundra DC Limited
Phantom Gray Pearl
K&N CAI -- JBA Y-Pipe -- BAMuffler by DirtyDeeds Industries-- "UNI-Chip'd" -- Front - Bilstein 5100's (2.5") -- Rear - Double 2" AALs on either side -- 285/70 R17 BFG KM2's on "17 Black Powder Coated Mickey Thompson Classic II's -- PowerSlot Slotted Rotors w/ Hawk HPS Pads -- Stainless Braided Brake Lines from Wheeler's -- Custom Black Badges -- BackRack -- Bed Coated TRD Skid Plate -- Midland 5001 CB mated to two 4' FireSticks mounted to the BackRack
... OH and a Valentine 1
Before and After
Bilstein 5100 Front and Rear (2.5" front & 1" rear blocK)
255/80R17 (33.3") Mud Terrain KM2
2006 Tundra Limited DC Phantom Grey
Bilstein 5100 Front & Rear (2.5" front lift / 1" rear block)
255/80R17 (33.3") Mud Terrain KM2
Nice ride
Sent from my Desire HD using AutoGuide.Com Free App
How do you like the wheel adapt? I'm looking into getting a set for my truck. Haven't decided on a brand or thickness. Did it mess with your alignment? And where did you purchase them?
if your going to go with 1.25'' adapters i recommend all pro offroad. i ran them on my old 4runner for 20k miles before i sold it and they were great. also a little cheaper then spidertraxx.
BAMF #1 2003 AC TRD 4x4--285/70/17 Nitto Trail Graps--Falken ORC 952 17x8.5 -12mm--Magnapack dual exhaust (14416)--15% tint, 50% windshield tint--2'' level--diff drop--AVS in channels--JVC KW-XR610--Tinted taillights--DRL delete--Mud flap delete
You have a link to find them.
Wheel Adapters, Wheel Spacers, Hub Rings, and much more! | Motorsport Tech
I got mine here. I didn't want the 1.25" i really wanted the 3/4" but our factory lugs are 7/8" long....so i opted for the 1" spacers
| |