Doug Thorley Headers for 05-06 w/ Dyno - Page 3

GORILLA · #31 (**permalink**) 03-07-2008, 03:08 PM

tundra racing is 1 great company. each and every time i had a question they always found the time to answer it quickly. without even ordering anything they were there to help. now that's a company we all should be considering & supporting.
i would imagine , if you had a issue or 2, they would be there for you to.
a real person with knowledge will answer the phone & try there best to resolve it.
they know tundra's that's for sure.
thank's tundraracing! you alway's seem to put a smile on my face.
gorilla

hammerhockey · #32 (**permalink**) 03-07-2008, 04:05 PM

DH - If you would, please keep us abreast of your install experience. I probably will buy these anyway, but am most interested in the true definition of "bolt on" in this instance.

I have a Borla dual cat back and am pretty excited about the combination. They look phenominal.

DH · #33 (**permalink**) 03-07-2008, 05:53 PM

I'll do a write up with photographs. Maybe next weekend if I can get all the parts in time.

Looks like I'll get to use my air tolls for the first time.

jamesjr4750 · #34 (**permalink**) 03-08-2008, 06:47 AM

Quote:

Originally Posted by DH

I'll do a write up with photographs. Maybe next weekend if I can get all the parts in time.

Looks like I'll get to use my air tolls for the first time.

Awesome!

silverTRD · #35 (**permalink**) 03-29-2008, 07:58 PM

how would these headers do on a s/c'd tundra with a unichip? i still want more torque!

Burger Steak & Eggs · #36 (**permalink**) 03-29-2008, 08:06 PM

The more air flowing, the greater the need to accommodate that flow, hence the headers would be of even greater benefit.

barron64 · #37 (**permalink**) 03-30-2008, 09:49 AM

Still waiting on the group buy for the 05 & 06 models!

silverTRD · #38 (**permalink**) 03-30-2008, 02:28 PM

well yes i definately understand that BS&E. that is the obvious answer. i ordered the s&s longtubes a while back and returned them but i wont start that up. i have'nt been on the forum in a while and was just wondering if there have been any issues on a s/c'd application. guess i should have been more clear.

also does DT offer a y pipe?

DH · #39 (**permalink**) 04-19-2008, 06:20 AM

Update- I can't even give my money to this company. Month in a half and still no headers. Was told a month ago the headers were being sent for powder coating and would be shipped...maybe they meant from China via hand delivered. Think I'm going to order from a manufacture that can deliver.

jaymz11 · #40 (**permalink**) 04-19-2008, 08:58 PM

i ordered mine from urd and got them this week.
putting on next week.

DH · #41 (**permalink**) 04-21-2008, 05:50 PM

Quote:

Originally Posted by jaymz11

i ordered mine from urd and got them this week.
putting on next week.

I couldn't find any on their website for the 05-06...am I missing something?

Doug Thorley Headers · #42 (**permalink**) 04-21-2008, 06:57 PM

Ok as of now I have 3 more sets on the shelf. You cannot find these for $465.00 ANYWHERE. If you do somebody is paying money for you to have these. Regular DEALER cost on these is $606.00 for these.

brendon_ak · #43 (**permalink**) 04-21-2008, 07:09 PM

Then why would you undercut your dealers and sell them for an alleged 570?

And what is up with DH not getting his?

DH · #44 (**permalink**) 04-21-2008, 07:20 PM

I was told today they were on back order.

GORILLA · #45 (**permalink**) 04-21-2008, 10:33 PM

TRY TUNDRARACING, and there are a few more places if you really check.
THEY HAVE THEM AT LESS,THAN ORDERING THEM DIRECT from DT.
NO OFFENSE doug throley.
but something doesn't sound right here.
DH, BUT I WOULD RETHINK this buy,& THESE HEADERS.
many companys have them on there shelves, and prices vary so much, it's almost sickening. i'm so glad i bought my JBA's.
gorilla