Bi Xenon Hid Low Beam Doesent Work! Help! 2005 Tundra - Toyota Tundra Forums : Tundra Solutions Forum

tundraenvy · #1 (**permalink**) 01-22-2008, 09:31 PM

okay so i finally bought the bi xenon kit for my tundra. 8000k for both fog and headlights... fogs work great and high beam xenons do too. the low beam hid's dont work. they do nothing at all. can anyone give me some insight?

brendon_ak · #2 (**permalink**) 01-23-2008, 12:46 AM

search, this specific question has already been covered

tundraenvy · #3 (**permalink**) 01-23-2008, 02:03 PM

i have followed instructions as previously listed but the resistors make no difference. i got all the exact same parts as listed to the T but it doesent allow fogs to come on... does anyone have any advice?q

brendon_ak · #4 (**permalink**) 01-23-2008, 02:48 PM

hmm, i'm stumped. i was fortunate to have mine work without problems.

sorry i can't be of more help to ya

tundraenvy · #5 (**permalink**) 01-23-2008, 02:50 PM

although id like to do it all myself im going to take my problem to a roadshop as impatience is a virtue of mine.. thaks for your imput

spoon · #6 (**permalink**) 10-30-2009, 06:35 PM

the problem is that the polarity is reversed on the tundra models you have to take out the connectors from the aftermarket kit and put them in the correct places with the oem harness fords also have this problem its just the way they decided to wire them at the factory get a test light and figure out which ones need to go in the appropiate spots