Rattle w/ VSE in the back seat!!!

[RCJAY]

I know I was suppose to post this in the audio section but I think the 1Gen Tundra owners might be more knowledgeable. So here it goes.

I did my seach but was still not clear what to do. I am getting some rattle from my 06 DC tundra w/ VSE. I understand that the plastic cover of the back seat is very close to the speak and the bass is making it rattle (not a whole lots but you know is there). Some have taken it out and some has put some foam. I was wondering what is the best way to do this, cuz i read some guy put some foam but it looks ugly. I was thinking putting dynamat on the inside between the cover and the seat does that Work? Thanks All.

[donofthedead]

I say take it off. I took mine off and it was pretty easy. It got rid of a lot of rattling. Now I have to deal with all the other rattles I hear inside the truck.

[AZ IS350]

It's the speaker buzzing against the plastic seat bottom cover. Nothing will look worse than taking the plastic cover off though. I went to super wally and bought adhesive felt pads like you put on the feet of furniture. I attached several to the seat bottom so that they pressed against the VSE all around the perimeter and created enough of a gap to eliminate the buzz. Nobody will notice unless the seat is flipped forward, and they are easy to remove later if wanted.