What wheels on your access cab? (pics) - Toyota Tundra Forums : Tundra Solutions Forum

slamm · #1 (**permalink**) 06-08-2009, 07:20 PM

I just turned in my 06 Double Cab XSP lease and bought an 03 Access Cab Limited 4WD. I am really missing the look of the wheels on my XSP so I am shopping for a new set. I have been considering the Gear Alloy Double Pump in Black and mirror.

I would love to see some pictures of what you put on your Access Cab, please include wheel and tire size.

Thanks

glock 37 · #2 (**permalink**) 06-08-2009, 07:53 PM

I put Michelin LTX M/S 265/70/16 on the stock rims that I had Powder Coated to the Factory color with 8 to 10 mils of powder with a clear coat !

Toyota is Haveing a problem with there factory wheels only 3 to 4 Mils of color no clear coat.

Brother is doing alot of Toyota dealers here in Pittsburgh Pa. area !

kdailey4315 · #3 (**permalink**) 06-08-2009, 09:30 PM

I just finished my lift and I put the American Racing ATX Mojave Teflon's on. I love the look of black rims. I have 285/70/17 Dueler Revos on them.

chucks_truck · #4 (**permalink**) 06-08-2009, 11:19 PM

I took some factory Tacoma rims and powder coated them the same color as my truck. I believe they are 16X8 size. And the wheel size is 265/70/R16, Nitto Terra Grapplers.

chethewitt · #5 (**permalink**) 06-09-2009, 01:50 AM

Quote:

Originally Posted by glock 37

I put Michelin LTX M/S 265/70/16 on the stock rims that I had Powder Coated to the Factory color with 8 to 10 mils of powder with a clear coat !

Toyota is Haveing a problem with there factory wheels only 3 to 4 Mils of color no clear coat.

Brother is doing alot of Toyota dealers here in Pittsburgh Pa. area !

Are those fender flares still available or does anyone have a part number for them?

Also, here is a pic of my truck. 18inch Optional BBS wheels I purchased locally for 400.00.

slamm · #6 (**permalink**) 06-09-2009, 06:17 AM

Thanks for the posts so far, the colored wheels look good.

Has anyone put 20" wheels and AT tires on a stock hight truck?

main70072 · #7 (**permalink**) 06-09-2009, 07:59 PM

Here's a picture I've found of my 03 Access Cab taken about a year ago with 265/50/R20 size tires.

KNABORES · #8 (**permalink**) 06-10-2009, 01:59 AM

Powdercoated black eagle beadlock look 16x8 with Maxxis Bighorn MT's and 1.25" wheel spacer/adapter. First picture is closeup before new tires. The others were with my phone after the tires.

fishn101 · #9 (**permalink**) 06-10-2009, 02:43 AM

These are mine. I got 'em on ebay for about $500 shipped. I wrapped them with 33" bfg's.

slamm · #10 (**permalink**) 06-10-2009, 06:09 AM

Fishin101

What lift did you install to fit the 33's? Do they rub in tight turns?

tinik · #11 (**permalink**) 06-10-2009, 10:01 AM

I've installed Enkei 6spoke wheels (285/50 r 20) - 31.5" tires, and have no rubbing issues.

spennrocks · #12 (**permalink**) 06-10-2009, 03:33 PM

17X9 RBP 93R's with 4" backspace, with bfg 315-70's. without the hub-covers.

might not be the aesthetic you're looking for.....

fishn101 · #13 (**permalink**) 06-10-2009, 05:22 PM

Quote:

Originally Posted by slamm

Fishin101

What lift did you install to fit the 33's? Do they rub in tight turns?

It was a 3" in the front and 2" in the rear lift/leveling kit. I believe it was this one.

Toyota Tundra 3" Lift & Leveling Kit 1999-2006 4WD/2WD:eBay Motors (item 260426115840 end time Jun-16-09 20:00:00 PDT)

The only rubbing I get is when I'm backing up and the wheel is hard over, even then it's only minimal. The tires fit perfectly and I think they look great. I tried 34"s but they rubbed all over the place.

Marauder · #14 (**permalink**) 06-10-2009, 05:35 PM

16x8 Konig Countersteer wheels, in flat black

hotrod76car · #15 (**permalink**) 06-10-2009, 06:35 PM

Dick cepek DC1 black with 285/75/16 Mickey Thompson Baja ATZ Radial