4Likes
LinkBack URL
About LinkBacksSorta. I got a set of 4 and started in the rear. They went on no problem and when I got to the front the new bleeders were WAY TO BIG!!! The tip would go into the threaded hole but the threads were not going to come close. Anyone know why? My truck is a 6-2003 so it supposedly had the caliper upgrade at the factory. Maybe it didn't.....
Ideas!?!?!?
| |
-
Welcome to Toyota Tundra Forums : Tundra Solutions Forums – General discussion forum for Toyota Trucks
Welcome to Toyota Tundra Forums : Tundra Solutions Forums - a website dedicated to all things Toyota Tundra.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join Toyota Tundra Forums : Tundra Solutions Forums today!
+ Reply to Thread
Results 1 to 15 of 22
- 06-16-2012 08:49 PM #1Veteran Member
- Join Date
- Sep 2009
- Location
- Sunset Cliffside, CA
- Posts
- 1,443
- Liked
- 229 times
- Images
- 14
- Rep Power
- 12376
Russell Speed Bleeders installed....
- Sponsored Links Remove Advertisements
- 06-16-2012 09:00 PM #2 Re: Russell Speed Bleeders installed....
what part # did you get?
2005 Tundra DC Limited 4wd - Phantom Gray Pearl
Search for your answer. http://www.tundrasolutions.com/forums/1gen-tundra/106548-how-to-search-this-forum/
Originally Posted by Thundra04struck 
- 06-16-2012 09:10 PM #3Veteran Member
- Join Date
- Sep 2009
- Location
- Sunset Cliffside, CA
- Posts
- 1,443
- Liked
- 229 times
- Images
- 14
- Rep Power
- 12376
Re: Russell Speed Bleeders installed.... 639560
- 06-16-2012 09:27 PM #4 Re: Russell Speed Bleeders installed....
part # SB1010 for the early gen 1 fronts and all gen 1 rears
part # SB7100 for the later gen 1 fronts
http://www.speedbleeder.com/automobile_applications.htmLast edited by SuckersWalk; 06-16-2012 at 09:32 PM.
2005 Tundra DC Limited 4wd - Phantom Gray Pearl
Search for your answer. http://www.tundrasolutions.com/forums/1gen-tundra/106548-how-to-search-this-forum/ Originally Posted by Thundra04struck
- 06-17-2012 05:28 AM #5Veteran Member
- Join Date
- Sep 2009
- Location
- Sunset Cliffside, CA
- Posts
- 1,443
- Liked
- 229 times
- Images
- 14
- Rep Power
- 12376
Re: Russell Speed Bleeders installed.... amazon sold it to me and sez: This product fits your 2003 Toyota Tundra Trim: SR5 Fitment Notes: Speed Bleeder; 10mm x 1 Thread; 35mm Length
- 06-17-2012 08:19 PM #6veteran member
- Join Date
- May 2005
- Location
- Lake Charles,LA
- Age
- 33
- Posts
- 1,788
- Liked
- 5 times
- Images
- 16
- Rep Power
- 20
Amazon is not great with matching part numbers at least that's the experience I've had with them.
Sent from my Autoguide iPhone appRemmy700P likes this.Independent dealer at AMSOIL. http://www.amsoil.com/index.aspx?zo=5072667
- 06-18-2012 05:28 AM #7Admin from Hell
- Join Date
- Apr 2004
- Location
- Fredericksburg VA
- Age
- 55
- Posts
- 13,070
- Liked
- 358 times
- Images
- 597
- Rep Power
- 47266
Re: Russell Speed Bleeders installed.... Amazon knows about books; not about auto parts.
__________________________________________________Salty DogYou've been... TUNDRASTRUCK!__________________________________________________Ride: 2001 Tundra SR5, 4WD, The Lean Mean Green Machine, Lift, Front: Bilstein 5100 Adjustable Shocks w/ Total Chaos Diff Drop, Lift, Rear: 1" Wheeler's Blocks, Wheels: Chromed Factory 4Runner Rims, 17", Tires: Bridgestone Revos, 285/70R-17, Performance: Unichip, JBA Titanium Ceramic Headers, Borla Exhaust, K&N Air Filter, Optima Yellow-top Battery, "Powered by Decals" decal, Flux Capacitor, Brakes: Upgrade to 2004 Calipers, EBC Slotted/Dimpled rotors, Hawk HPS pads, Interior: Dog Hair on Back Seat, Coffee Stains on Console, Bling: Ivan Stewart TRD Grille, Westin Nerf Bars, Clear Corners & Eurotails, Debadged, Audio: Kenwood DDX512 Head Unit, Kenwood KCA-XM100V Satellite Radio Interface, Kenwood KCA-BT200 Bluetooth Interface, Polk Audio db6501 component speakers (Front), Polk Audio db651s speakers (Rear), Profile AP740 4-channel amplifier, Rockford Fosgate 8” Punch subwoofer (x 2) in Q-Logic enclosure, Profile AP700M mono subwoofer amplifier, Audiovox ACA200W Rear-view camera, Shark Fin Antenna, Other: BedRug, Viair 450C compressor, 2.5 Gallon air tank, Kleinn Pro Series 4-Trumpet air horns, Eye Candy: Hottie Wife in Passenger Seat, Security System: One very large Collie and a High-Energy Shetland Sheepdog who isn't that big, but makes up for it in Tenacity.__________________________________________________
- 06-18-2012 10:26 AM #8Veteran Member
- Join Date
- Sep 2009
- Location
- Sunset Cliffside, CA
- Posts
- 1,443
- Liked
- 229 times
- Images
- 14
- Rep Power
- 12376
Re: Russell Speed Bleeders installed.... the packaging is in the dump already so i can't return the two bleeders. anyone want them? pay for shipping from 92139 and they're yours.
- 06-18-2012 07:22 PM #9Senior Contributor
- Join Date
- May 2002
- Location
- boston, ma
- Posts
- 5,235
- Liked
- 540 times
- Images
- 1
- Rep Power
- 291006
Re: Russell Speed Bleeders installed.... Don't forget....there's a fifth bleeder at the proportioning valve and it isn't the same size as the front or back brakes. I just ordered two new ones for the rear and one for the proportioning valve from the dealer to replace the rusted out ones. Originally Posted by 2003bajatundra4x4ac
Hoping to get it in within the next couple of days since they weren't at the local distribution center."I always give 100% at work: 13% Monday; 22% Tuesday; 26% Wednesday; 35% Thursday; 4% Friday."
"Failure is not an option; its a lifesytle"
How to perform a search: Select "Advanced Search" -> Choose the "Single Search Content Type" tab, Enter the "Keyword", Select Search in Forum "1st Gen Tundra", Search by Prefix "any thread", Show results as: Choose either "Posts" or "Threads", then click on "Search Now".
- 06-18-2012 08:19 PM #10Veteran Member
- Join Date
- Sep 2009
- Location
- Sunset Cliffside, CA
- Posts
- 1,443
- Liked
- 229 times
- Images
- 14
- Rep Power
- 12376
Re: Russell Speed Bleeders installed.... really?
- 06-18-2012 09:37 PM #11Senior Contributor
- Join Date
- Nov 2009
- Location
- check the bar or liquor store
- Posts
- 5,227
- Liked
- 1139 times
- Images
- 216
- Rep Power
- 190697
Re: Russell Speed Bleeders installed.... Yup, it's up top over the rear diff. Up by the brake proportion valve thing.
I would hope it's the same size as one or the other, I see there is no listing for it on that site. Now I want these. I'd bleed my brakes just for fun if I had these.Last edited by tundrunk; 06-18-2012 at 09:50 PM.
El que se rie, de sus maldades se acuersa..
Originally Posted by Highwaylizard
- 06-20-2012 06:59 AM #12Admin from Hell
- Join Date
- Apr 2004
- Location
- Fredericksburg VA
- Age
- 55
- Posts
- 13,070
- Liked
- 358 times
- Images
- 597
- Rep Power
- 47266
Re: Russell Speed Bleeders installed.... I bought Speed Bleeders for my Corolla when I upgraded the brakes and did the rear-wheel disk conversion. They are a lot nicer than "Honey, can you come here and help me bleed my brakes....?"
Remmy700P likes this.__________________________________________________Salty DogYou've been... TUNDRASTRUCK!__________________________________________________Ride: 2001 Tundra SR5, 4WD, The Lean Mean Green Machine, Lift, Front: Bilstein 5100 Adjustable Shocks w/ Total Chaos Diff Drop, Lift, Rear: 1" Wheeler's Blocks, Wheels: Chromed Factory 4Runner Rims, 17", Tires: Bridgestone Revos, 285/70R-17, Performance: Unichip, JBA Titanium Ceramic Headers, Borla Exhaust, K&N Air Filter, Optima Yellow-top Battery, "Powered by Decals" decal, Flux Capacitor, Brakes: Upgrade to 2004 Calipers, EBC Slotted/Dimpled rotors, Hawk HPS pads, Interior: Dog Hair on Back Seat, Coffee Stains on Console, Bling: Ivan Stewart TRD Grille, Westin Nerf Bars, Clear Corners & Eurotails, Debadged, Audio: Kenwood DDX512 Head Unit, Kenwood KCA-XM100V Satellite Radio Interface, Kenwood KCA-BT200 Bluetooth Interface, Polk Audio db6501 component speakers (Front), Polk Audio db651s speakers (Rear), Profile AP740 4-channel amplifier, Rockford Fosgate 8” Punch subwoofer (x 2) in Q-Logic enclosure, Profile AP700M mono subwoofer amplifier, Audiovox ACA200W Rear-view camera, Shark Fin Antenna, Other: BedRug, Viair 450C compressor, 2.5 Gallon air tank, Kleinn Pro Series 4-Trumpet air horns, Eye Candy: Hottie Wife in Passenger Seat, Security System: One very large Collie and a High-Energy Shetland Sheepdog who isn't that big, but makes up for it in Tenacity.__________________________________________________
- 06-20-2012 07:02 AM #13Admin from Hell
- Join Date
- Apr 2004
- Location
- Fredericksburg VA
- Age
- 55
- Posts
- 13,070
- Liked
- 358 times
- Images
- 597
- Rep Power
- 47266
Re: Russell Speed Bleeders installed.... On the Russell website, they only list one part number for all Tundras 00-06 (front) and don't even list a part number for the rears.
Russell Performance - Truck/SUV Speed Bleeders__________________________________________________Salty DogYou've been... TUNDRASTRUCK!__________________________________________________Ride: 2001 Tundra SR5, 4WD, The Lean Mean Green Machine, Lift, Front: Bilstein 5100 Adjustable Shocks w/ Total Chaos Diff Drop, Lift, Rear: 1" Wheeler's Blocks, Wheels: Chromed Factory 4Runner Rims, 17", Tires: Bridgestone Revos, 285/70R-17, Performance: Unichip, JBA Titanium Ceramic Headers, Borla Exhaust, K&N Air Filter, Optima Yellow-top Battery, "Powered by Decals" decal, Flux Capacitor, Brakes: Upgrade to 2004 Calipers, EBC Slotted/Dimpled rotors, Hawk HPS pads, Interior: Dog Hair on Back Seat, Coffee Stains on Console, Bling: Ivan Stewart TRD Grille, Westin Nerf Bars, Clear Corners & Eurotails, Debadged, Audio: Kenwood DDX512 Head Unit, Kenwood KCA-XM100V Satellite Radio Interface, Kenwood KCA-BT200 Bluetooth Interface, Polk Audio db6501 component speakers (Front), Polk Audio db651s speakers (Rear), Profile AP740 4-channel amplifier, Rockford Fosgate 8” Punch subwoofer (x 2) in Q-Logic enclosure, Profile AP700M mono subwoofer amplifier, Audiovox ACA200W Rear-view camera, Shark Fin Antenna, Other: BedRug, Viair 450C compressor, 2.5 Gallon air tank, Kleinn Pro Series 4-Trumpet air horns, Eye Candy: Hottie Wife in Passenger Seat, Security System: One very large Collie and a High-Energy Shetland Sheepdog who isn't that big, but makes up for it in Tenacity.__________________________________________________
- 06-20-2012 07:31 AM #14Admin from Hell
- Join Date
- Apr 2004
- Location
- Fredericksburg VA
- Age
- 55
- Posts
- 13,070
- Liked
- 358 times
- Images
- 597
- Rep Power
- 47266
Re: Russell Speed Bleeders installed.... Go here instead.
They list the bleeders for the later Gen 1's and are a helluva lot cheaper that Russells.
Automobile Applications__________________________________________________Salty DogYou've been... TUNDRASTRUCK!__________________________________________________Ride: 2001 Tundra SR5, 4WD, The Lean Mean Green Machine, Lift, Front: Bilstein 5100 Adjustable Shocks w/ Total Chaos Diff Drop, Lift, Rear: 1" Wheeler's Blocks, Wheels: Chromed Factory 4Runner Rims, 17", Tires: Bridgestone Revos, 285/70R-17, Performance: Unichip, JBA Titanium Ceramic Headers, Borla Exhaust, K&N Air Filter, Optima Yellow-top Battery, "Powered by Decals" decal, Flux Capacitor, Brakes: Upgrade to 2004 Calipers, EBC Slotted/Dimpled rotors, Hawk HPS pads, Interior: Dog Hair on Back Seat, Coffee Stains on Console, Bling: Ivan Stewart TRD Grille, Westin Nerf Bars, Clear Corners & Eurotails, Debadged, Audio: Kenwood DDX512 Head Unit, Kenwood KCA-XM100V Satellite Radio Interface, Kenwood KCA-BT200 Bluetooth Interface, Polk Audio db6501 component speakers (Front), Polk Audio db651s speakers (Rear), Profile AP740 4-channel amplifier, Rockford Fosgate 8” Punch subwoofer (x 2) in Q-Logic enclosure, Profile AP700M mono subwoofer amplifier, Audiovox ACA200W Rear-view camera, Shark Fin Antenna, Other: BedRug, Viair 450C compressor, 2.5 Gallon air tank, Kleinn Pro Series 4-Trumpet air horns, Eye Candy: Hottie Wife in Passenger Seat, Security System: One very large Collie and a High-Energy Shetland Sheepdog who isn't that big, but makes up for it in Tenacity.__________________________________________________
- 06-20-2012 10:58 AM #15Senior Contributor
- Join Date
- May 2002
- Location
- boston, ma
- Posts
- 5,235
- Liked
- 540 times
- Images
- 1
- Rep Power
- 291006
Re: Russell Speed Bleeders installed.... I've read that the speed bleeders tend to wear out quickly and don't seal properly after several bleedings. Just what I've read from a couple other general forums, so I decided to go with the original. Originally Posted by tundrunk
OP, here are the part numbers for the rear and proportioning valve (Toyota numbers). Maybe you can find the equivalent:
Rear Bleeder Plugs: 47547-12010
Proportioning Valve Bleeder Plug: 47547-27030
Rubber caps for Plugs (still called plugs): 31478-30010Last edited by jack mccarthy; 06-20-2012 at 11:00 AM.
2003bajatundra4x4ac likes this."I always give 100% at work: 13% Monday; 22% Tuesday; 26% Wednesday; 35% Thursday; 4% Friday."
"Failure is not an option; its a lifesytle"
How to perform a search: Select "Advanced Search" -> Choose the "Single Search Content Type" tab, Enter the "Keyword", Select Search in Forum "1st Gen Tundra", Search by Prefix "any thread", Show results as: Choose either "Posts" or "Threads", then click on "Search Now".
Reply With Quote
Acadia 
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
» Search
» Auto Insurance 
» Wheel & Tire Center
» Forum Threads
| |
