You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
1Gen-TundraGeneral discussion forum for the 2000 to 2006 Toyota Tundra.
This is a discussion thread titled "Retrax electric tail gate lock", within the 1Gen-Tundra forum, part of the Truck Forums category.
Finally installing the retrax cover, cover lock and tailgate lock today. Reading the instructions, it says that to interface with the existing truck wiring:
12.* Remove the left side kick panel and locate the Pink / Black (Lock) and the Red / Orange (Unlock) wires. Some 04 Tundra's use the Blue/White (lock) Black/Yellow (unlock).
Here's my question. I have a DC 05 4x4 trd, which of color options would it be? I haven't started yet and don't know if it will be obvious or not. Also, for the cover lock, a shroud came with it. Have you found this useful to install.
Also, on the retrax cover install, did you all put the drain tube for the spiral through the oblong rubber access plug on the left lower back wall of the truck bed?
Finally installing the retrax cover, cover lock and tailgate lock today. Reading the instructions, it says that to interface with the existing truck wiring:
12.* Remove the left side kick panel and locate the Pink / Black (Lock) and the Red / Orange (Unlock) wires. Some 04 Tundra's use the Blue/White (lock) Black/Yellow (unlock).
Here's my question. I have a DC 05 4x4 trd, which of color options would it be? I haven't started yet and don't know if it will be obvious or not. Also, for the cover lock, a shroud came with it. Have you found this useful to install.
Also, on the retrax cover install, did you all put the drain tube for the spiral through the oblong rubber access plug on the left lower back wall of the truck bed?
TIA
KJ
On the Double Cab
Power Lock:
Blue/red - Drivers kick
Power Unlock:
Red/black - drivers kick
Forum Rules
Searching for an answer to your Tundra or other Toyota question? search HERE!
Got a question 'bout TS.com site policy? click HERE!
Ready to create a new thread? WATCH THIS VIDEO FIRST.
Finally installing the retrax cover, cover lock and tailgate lock today. Reading the instructions, it says that to interface with the existing truck wiring:
12.* Remove the left side kick panel and locate the Pink / Black (Lock) and the Red / Orange (Unlock) wires. Some 04 Tundra's use the Blue/White (lock) Black/Yellow (unlock).
Here's my question. I have a DC 05 4x4 trd, which of color options would it be? I haven't started yet and don't know if it will be obvious or not. Also, for the cover lock, a shroud came with it. Have you found this useful to install.
Also, on the retrax cover install, did you all put the drain tube for the spiral through the oblong rubber access plug on the left lower back wall of the truck bed?
TIA
KJ
KJ,
You can also check out my photo gallery...I have detailed pics of the dynolock install for a 2004 Tundra DC and pics of the Retrax....the drain tubes I ran through the plastic drain plugs in the vertical wall of the bed not the ones one the bed floor....hope that helps
__________________ Pistol Pete #1 COLTS fan!!!!
2004 Toyota Tundra Double Cab 4X4 (7844A), Phantom Grey Pearl, All weather guard package, fog lamps,keyless entry, 17" AA wheels, towing package, color-keyed overfenders, 4.1mm Limited Slip Diffy, Delux 3-in-1 JBL stereo, privacy glass, floor mats with sill protectors, bed extender
Retrax electric tail gate lock
Linear Mode
