You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
1Gen-TundraGeneral discussion forum for the 2000 to 2006 Toyota Tundra.
This is a discussion thread titled "CIPA Rearview Mirror Power issue", within the 1Gen-Tundra forum, part of the Truck Forums category.
I followed all of the instructions and tapped into the red wire w/blue stripe
on the T5 flasher block. This should be a power suppply, ignition on...., but it's not giving power. I already did a direct to battery tap to make sure the mirror was working, and it is. Any other power sources under that dash that
are ignition only on an 05 Tundra?
Thanks,
Don
I know many are ignition only. I'd suggest using a circuit tester; either a light that comes on if 12v is present or a volt meter. Probe the exposed metal parts of the fuse block til you get a 12v source (with the switch turned on). Next turn the switch off and ensure that the voltage is shut off. Hope that makes sense?
CIPA Rearview Mirror Power issue
Linear Mode
