[dibble9012]

Well I finished my temporary backup camera today, works great, but cant wait till the custom tailgate handle camera comes out I will immediately replace this with the custom Tundra camera. I made a custom harness for my OEM nav. I bought some "rca female" solder type jacks that are made to go on the end of a cable. I attached that to the wires coming out of the R10 connector on the back of the headunit. This way I can always upgrade my camera and it will always be plug and play. I ran the cable under the drivers seat through the grommet and zip-tied the cable to the OEM loom running to the back of the truck, big job but it looks really neat Then I just roto-zipped the toyota tow hitch blank so the camera would fit. I wired the camera to ignition hot instead of reverse hot because it was easier, and the headunit senses reverse from a separate reverse wire, not from the camera input

Anyways, it's a really a nice piece of mind with all the kids around our neighborhood, doesn't replace rear view mirrors though,lol



These first 3 pics are with the flower post closest to the truck.







These pics are with the flower pot farther away.