[Dixie4x4]

To be safe, I pulled the tailgate apart and checked for continuity on the wires:



Sure enough, these are the right wires. So I spliced a sheilded cable to the video feed (red V+, grey V-) and a red/black cable for the camera power (black B+, white GND):



Again, these were fished down the A-pillar and over to the center console.

When you terminated these wires, did you convert them to RCA? How does one go about such a task? Do you have pics of the wire ends? Do I simply cut the rca, use the inside line as - and the shield as + and splice the two?