View Single Post
  #11 (permalink)  
Old 02-17-2008, 09:23 PM
PENER PENER is offline
Registered Member
 
My Garage
PENER's Photo Albums
Last Online: Yesterday 10:19 PM
Join Date: May 2007
Location: Florida
Posts: 405
Rep Power: 2
PENER is on a distinguished road.
Default Re: Common Signal Lines for the 2007 Tundra

Quote:
Originally Posted by outriderx View Post
Blue is always on power (need to verify if it shuts off after 20 minutes)
Grey (not the grey in the video bundle of 4 wires) switched power
Violet unkown? anyone?
White w/black stripe unkown? anyone?

Can someone tell me how to verify ground? I am guessing it is on Violet or more likely White w/black stripe. I will also measure the voltage out of these wires and update this thread.

EDIT: Verified voltage on both Blue and Grey wires is 12V, regulated power for the OEM camera (5.5 - 7.05V) must come from the OEM backup monitor. I also believe the white w/black stripe is the ground since it is positioned opposite the other wires AND there is a wire (same color) in the exact same position in the harness that connects to the overhead console lights.
I don't know if it's ever been figured out, but I think Violet wire would be a reverse signal, so it would turn on the little back up monitor and send regulated power to the camera in the back.
__________________
-Greg

Red/Grey 4WD Double Cab 5.7 w/SAP & XSP
Slate/Black 2WD Crew Max 5.7 (traded in)

locking gas cap - the only mod you really need
Reply With Quote