Bullardshaun,
I had to register to the site below to see the pics.. Just wanted to confirm a couple things.. If anyone cares to chime in please feel free to do so..
1. Are the Side Retaining Bolts Necessary?
The guy on the Frontier site below said the center bolt on his Springpak Broke because it was so weak.. (Oh GREAT!) and the biggest issue was getting things to line up on the Axle when he was ready to raise it back up.. He had to use a Ratcheting Cargo Strap to get things to line up. Holy COW!.
2. Is the Axle alignment that difficult? once your ready to jack it back up?
THanks!
Quote:
Originally Posted by bullardshaun
When I put mine on all I needed was 2 c-clamps, jack, jackstands,a mallet and my electric impact( wasn't necessary but saves a lot of time.) The install was pretty straight forward, especially since pretty much everything you need to take off is a 19mm. Here's a write up for installing similar Deavers on a Frontier PRG 3" spacer and deaver install guide - Nissan Frontier / Navara Forum. When I did mine I used the mallet to help align the centerpin. |