I'm new here so somebody may have already posted something about this. I want to put the leveling kit on my 08 crewmax and i'm looking for some info. Does it level the truck out or is the front higher than the rear? And what size tires can you run with this kit without rubbing? Can somebody help me out?
Heath
I have it on my truck and it levels it out perfectly even. And for the tire question what size wheel do you plan on running?
__________________ 2008 Slate SR5 2WD 5.7 Double Cab
-Readylift SST 3/1 Level Lift
-305/55/R20 Cooper Zeon LTZ Tires
-20" XD Series Chrome Hoss
-Front Tinted Windows to Match Factory
-Custom Billet Grille
-Texas Edition Exhaust Tip
-Back-Up Camera
-Craven Speed Stubby Antenna
-Double Cab Rear Seat Mod
-Rear Seat Panel Mod
-Infinity Kappas 62.9i Front/Rear in process
-Infinity Kappa Five Amplifier in process
ReadyLift recommends the 285/65/20. Pretty much anything 33x12.5x20 will fit without rubbing. Or at least it should.
__________________ 2008 Slate SR5 2WD 5.7 Double Cab
-Readylift SST 3/1 Level Lift
-305/55/R20 Cooper Zeon LTZ Tires
-20" XD Series Chrome Hoss
-Front Tinted Windows to Match Factory
-Custom Billet Grille
-Texas Edition Exhaust Tip
-Back-Up Camera
-Craven Speed Stubby Antenna
-Double Cab Rear Seat Mod
-Rear Seat Panel Mod
-Infinity Kappas 62.9i Front/Rear in process
-Infinity Kappa Five Amplifier in process
I have the 2.4" in the front...no rear block, larger tires and a pretty heavy bumper (which weighs the front down) and my front is about 1.5 inches higher than the rear. I imagine that the 3/1 would probably be just about right for leveling with the stock tires size
__________________
2007 Tundra DC 4.7 SR5 TRD 4X4
Garmin Nuvi 1300T
Stubby antenna
Clear Bra,
ARB Bumper,
Line-X,
325/60/18 Nitto Terra Grapplers,
18" KMC XD Hoss Black,
ARE CX Series Topper,
KC Rally 800 long range lights,
Tinted windows,
Wet Okoles Frt & Rear,
Weather Tech rain deflectors,
Weather Tech floor liners frt/rear,
Ready Lift 2.4"
Bel Vector 995 Radar Detector,
Wilson cellular booster,
Cobra 75 WX ST Compact/Remote CB,
Sirius Satellite Radio,
S&W .38 Spl Laser grip (hot pink),
TRD sway bar (black widow style),
Debadged except TRD sticker,
Roxy Sticker
TS Tank Top
____________________________
Wish list:
Horn Blaster train horn, ARB rear bumper (if they ever make one) or line-x rear bumper, Color matched fender flares, Underseat storage of some sort, Winch (if i can ever afford one), GPS system! Sun roof! Going broke thinking about it.
__________________________________________
I need a new word of the month people!
If you use the ReadyLift SST with the 1 inch block in the rear, will the VSC need to be adjusted?
No, it shouldn't. All I did after I installed it was get it aligned.
__________________ 2008 Slate SR5 2WD 5.7 Double Cab
-Readylift SST 3/1 Level Lift
-305/55/R20 Cooper Zeon LTZ Tires
-20" XD Series Chrome Hoss
-Front Tinted Windows to Match Factory
-Custom Billet Grille
-Texas Edition Exhaust Tip
-Back-Up Camera
-Craven Speed Stubby Antenna
-Double Cab Rear Seat Mod
-Rear Seat Panel Mod
-Infinity Kappas 62.9i Front/Rear in process
-Infinity Kappa Five Amplifier in process
I have the 2.4" in the front...no rear block, larger tires and a pretty heavy bumper (which weighs the front down) and my front is about 1.5 inches higher than the rear. I imagine that the 3/1 would probably be just about right for leveling with the stock tires size
ReadyLift Leveling Kit
Linear Mode
