Clear Corners for 06 DC Tundra... - Page 5

Maui-Thunda · #61 (**permalink**) 02-12-2008, 12:14 AM

If someone knows that the '05-'06 DC models are the same as my '04 DC, I put in a set of clear corners that were for '05-'06 Sequoia and they fit perfect, no joke! I bought them from a performance shop in california and if I can find the web address, I'll post it up!

Big_Al1 · #62 (**permalink**) 02-12-2008, 12:40 PM

no they are different

bjg411 · #63 (**permalink**) 04-27-2008, 09:58 PM

So I sent an email to that company also, and yah it's quite annoying that you can find whetever you want for the new Tundras from multiple grilles to clear corners, but the 06, especially the DC because the lights are different, it is a scavenger hunt and there aren't many varities or options, welp if anyone finds anything out I am definetlly eager to hear I want my Clears!

RobertT3 · #64 (**permalink**) 04-27-2008, 11:28 PM

I've waited since early '06 for clear corners for my '06 DW Tundra...now '08 Tundra replaced it..and luv it

..still wonder why anyone hasn't made any clears tho..

ANTO1NE · #65 (**permalink**) 05-04-2008, 08:24 PM

Quote:

Originally Posted by nick06tundra

i cant find any, and i want them so bad. i HATE the amber in the front, it needs to go. anybody know where to get some for the 06? ebay has none, and ive googled.

Check this OUT! Everyone says they cant find em but these look like their the ones!

Toyota Tundra 00-Up Clear Corner Light

jaymz11 · #66 (**permalink**) 05-06-2008, 11:24 AM

those wont fit the 05-06
already tried.

Marauder · #67 (**permalink**) 05-06-2008, 11:29 AM

I talked to someone who just used the 00-04 corners, cut off the mounting tab that didn't line up and used double sided tape to hold it in position.

dibble9012 · #68 (**permalink**) 05-06-2008, 04:43 PM

Could you maybe drill a hole in the truck to match up with that mounting tab?

Cujo626 · #69 (**permalink**) 05-16-2008, 10:33 AM

My 05 DC has the clear corners for an 04, it looks really good looking from the side, but wenw you look directly in front of it, it looks stupid! i get so embarassed when people are telling me "are the lights on wrong?". i know what your thinking..."put the old ones on" but my older brother was the previous owner of the truck and threw away the OEM corners

.

I'll try to post a picture to show the monstrosity.

Big_Al1 · #70 (**permalink**) 05-16-2008, 01:47 PM

Quote:

Originally Posted by Cujo626

My 05 DC has the clear corners for an 04, it looks really good looking from the side, but wenw you look directly in front of it, it looks stupid! i get so embarassed when people are telling me "are the lights on wrong?". i know what your thinking..."put the old ones on" but my older brother was the previous owner of the truck and threw away the OEM corners

.

I'll try to post a picture to show the monstrosity.

Bring on the pictures.

Cujo626 · #71 (**permalink**) 05-27-2008, 04:10 PM

here are the pictures of my 05 with 03-04 clear corners, sorry for the wait.

TundraBear · #72 (**permalink**) 05-27-2008, 06:11 PM

they look good. the gap at the bottom doesn't look too bad. any rubbin' when open/close the hood? are they secure? i remember the clear corners on my '02 access cab were a bit wobbly.

Cujo626 · #73 (**permalink**) 05-27-2008, 09:04 PM

they're pretty stiff and secure. no rubbing on the hood either. Honestly if it wasnt for the gap i'd be very happy with them.

Delirious187 · #74 (**permalink**) 05-27-2008, 09:29 PM

Have you taken the lense out to see what is obstructing it from sitting flush? could you possibly shave it down a little to fit better. I noticed your truck is also a DC. Does anyone know if this is similar with the AC?

Cujo626 · #75 (**permalink**) 05-28-2008, 09:59 AM

i pulled them off a month ago to see if something needed to be shaved or clipped, i couldnt really take the time i wanted because it was getting dark. I'll pull them off this week and keep you guys updated.