You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Aftermarket ProductsDiscussions about aftermarket products and accessories.
This is a discussion thread titled "Clear Corners for 06 DC Tundra...", within the Aftermarket Products forum, part of the Technical & Vehicle Assistance Forums category.
put some clear turning signal bulbs in there while u r at it. no point in doing all of that and still having yellow bulbs.
__________________
2005 Silver Texas Edition DC SR5 w/sunroof, 20" rims, Magnaflow Catback, Doug Thorley Headers, Downey FSB Endlinks w/ES Bushings, Downey HD Off Road Skid Plate, Hellwig RSB, PP springs, Tokico Trekmasters, Bilstein 5100, ASP Underdrive Pulley, Bazooka VSE, Panasonic CQ-C8803U w/bluetooth/Sirius, Polk 6750, Polk 675, SS Ultra High-Low-Fog Beams, LED Cool White Bulbs everywhere, TRD Mesh Grille Insert
2005 Lunar Mist Camry LE, Custom Leather, TRD Strut Bar, TRD Rear Sway Bar, TRD Lowering Springs, SS Ultra Beams, K&N AF, JVC KW-XC410 w/Sirius, Polk 690
Has anyone tired opening up the stock corner to see how hard it is to remove the orange reflector? I did this when I was younger with my 95' Talon and it worked perfect. Used a heat gun and plastic wedge to split the seal and removed the reflector. Then used high temp clear caulk and things went great. Was thinking of buying one of ebay and trying it.
__________________ 05 Spectra Blue SR5 DC
Flowmaster Dual setup, 2.5" Tuff Country lift, Helo Maxx6 18" rims on 275/70/18 tires, Silverstar headlights, matching tint on front windows, AVIC-D3 w/ backup and Ipod, Leer 100XQ, more to come.....(I hope!)
i have a 05 DC and bought the cc off of ebay,it was for the 04' year. i had to modify/cut some parts off of the stock headlight(plastic trim that holds the corner light in place) to make it fit i didn't want to cut the stock headlight but had to,otherwise the cc would not seat well(there was a big gap from the headlight and the clear corner and would not fit in flush up against the headlight) other than that problem the cc just bolts right on. i will post some pics later.
Does the light stay put. And did you have to cut alot of stuff out, like major support stuff???
the cc is secure,the only thing i had to cut was the plastic piece off of the side of the headlight that clips into the corner light.the after market piece wasn't clipping with the stock headlight and when i did get it to fit the cc didn't fit flush up against the headlight.other than that everything bolts right up and is pretty secure.
the cc is secure,the only thing i had to cut was the plastic piece off of the side of the headlight that clips into the corner light.the after market piece wasn't clipping with the stock headlight and when i did get it to fit the cc didn't fit flush up against the headlight.other than that everything bolts right up and is pretty secure.
Cool more pictures??? I hear from other in here that they had to cut too much and wasn't worth it. Can anyone who have done just chime in?? Thx.
damn that sucks
i bought the 04 clear corners and they didnt line up but i didnt think about cutting the tab off
Now i wish i never sold them haha
guess i gotta look for some more
Re: Clear Corners for 06 DC Tundra...
05 Spectra Blue SR5 DC
i didn't want to cut the stock headlight but had to,otherwise the cc would not seat well(there was a big gap from the headlight and the clear corner and would not fit in flush up against the headlight) other than that problem the cc just bolts right on. i will post some pics later.
Re: Clear Corners for 06 DC Tundra...
Linear Mode
