Tundra rear wheel well liners - Toyota Tundra Forums : Tundra Solutions Forum

old5oaks · #1 (**permalink**) 10-20-2006, 11:13 AM

Does anybody know if wheel well liners are available for the tundra. Dodge sells them for the Ram trucks. See the link:
Dodge Ram Wheel Well Liners

This sure would help in keeping the crud off of the frame,etc.

Quadude · #2 (**permalink**) 10-20-2006, 01:20 PM

My 97 dodge had those. They really do help keeping it cleaner and look good.
I have been thinking about some for the Tundra also.
Possibly could make some for it if they are not available.

DevinSixtySeven · #3 (**permalink**) 10-20-2006, 03:59 PM

same thing as "lift lips", which are just industrial neoprene or rubber/poly/composite sheeting. find your local industrial rubber supplier and get some scrap sheet and some good scissors, make 'em yourself for less than a quarter of the quoted price there.

the gap on a tundra between the deck of the bed and the top of the frame rail is only about an inch, if that, in the wheel well...wouldnt take much material.

i have a 10'x10" roll of industrial neoprene sitting in the garage right now for a similar project, cost me five bucks.

-sean

BAD BONEZ BJ · #4 (**permalink**) 08-28-2007, 08:12 AM

This is an old post but here is a source for some Gap Guards. Installed on my truck very quick and easy. Does cover that gap in-between the bed and frame.

Gap Guards, Performance Accessories Body Lift Kits, Gap Guards for Toyota Trucks and Vehicles.

Good Luck!