You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Audio & StereoTechnical discussions about factory or aftermarket audio and video systems.
This is a discussion thread titled "2000 tundra no power to amp", within the Audio & Stereo forum, part of the Technical & Vehicle Assistance Forums category.
i finally was able to get my aftermarket stereo in and yes i had the factory amp. i have a 2000 tundra. now i am running into issues that my amp isn't getting any power. i have re-sanded my grounds and double checked all my wiring. am thinking i will have to pull the h/u out and hook up the power antenna to the p-cont wire that goes to the amp. any suggestions or ideas as to what else i could do? other than that all i can think of is maybe a bad amp?????
I presume you installed an after market amp. To troubleshoot I would:
check voltage at amp terminals
check voltage at remote terminal on amp with hu on
That should tell where the problem is.
__________________
First Gen > *
Short List: BFG AT, Demello HD round Sliders, Donahoes, TC UCAs, Rear ARB Air locker, wrap around rear bumper, HAM
Eclipse CD-7100 HU, Zed Audio Deuce, Dynaudio system 240MKII (active), Zuki Eleet 4 channel, Koda 10 sub.
Next up: ?
2000 tundra no power to amp
i finally was able to get my aftermarket stereo in and yes i had the factory amp. i have a 2000 tundra. now i am running into issues that my amp isn't getting any power. i have re-sanded my grounds and double checked all my wiring. am thinking i will have to pull the h/u out and hook up the power antenna to the p-cont wire that goes to the amp. any suggestions or ideas as to what else i could do? other than that all i can think of is maybe a bad amp????? 
Linear Mode
