Your Tundra's aftermarket audio setup

[yrtneg24]

If we have a thread like this, please delete mine. If not here's the format and please list part numbers and specific work involved that you had to do to make it all work.

Year :

Cab configuration :

Head Unit :

component speakers :

sub-woofer :

amplifier :

[dapperdan]

-2007
-regular cab long bed
-jvc walmart crap
-alpine type E's
-10" ported kicker in slim box
-Power Acoustiks 400watt amp (I like to hear the treble haha, had 2 12" memphis subs and a 1400watt amp and it was OVERKILL)

I was a cheapo and used the factory speakers as sort of a mounting bracket for the new Alpines, took about an hour or two, but with a sautering gun, some liquid nails, and metal wire, it was solid as a rock, and sounds good too! I basically just cut the speaker out of its old housing and dremeled the edges of the housing to fit the alpines. You can get adapters online, but it's not like someone is going to take your door panel off and see that you were a cheap bastard haha

[Eagleyed]

-2011
-Double Cab
-Older Alpine CDA9885
-Alpine SPX-17PRO components - utilized carspeaker-adapters spacers/tweeters in A-pillars vs. "wing" location
-DIYMA Reference 12" sub mounted in prefabbed box behind front passenger seat. Bolts to the 1/3 seat; not an issue since I rarely have passengers back there.
-Pioneer PRS-D800 (class D) for components/Alpine MRP M500 sub amp

[KyleBechtold]

2010
CM
Pioneer z120
-6 ID XS 65s 3 in each front door
-4 Sundown Sa-8s
-Saz 3kd(3000watts RMS)
MBQ DCS 4125 for front speakers
Kenwood KAC8401(I think) on tweeters

[loknload]

2010
Double Cab
Stock HU w/ AudioControl LCQ-1
Polk Audio Momo 6.5" components
2 JL Audio 10W1v2 in 2 Cu ft ported enclosure
Alpine MRP-F450 on the fronts and rears
Soundstream RUB1.1000D on the subs

Pics will be forthcoming as sooin as I get done messing around and decide I'm done

[Metanium]

2010
Crewmax
Factory HU w/Audison Bit Ten D
Hybrid Audio Technologies L8 & L3SE
Alpine Type R Thin 12" SWR-T12
JL Audio HD900/5

[ZapcoTundra]

ill play along...

2004 AC

Alpine 9886

Zapco Competition 6.5" mid bass in doors
Zapco Competition 1.1" tweets in doors

Image Dynamics 6.5 CTX coax in back for rear fill

Focal Polyglass 11" for low end

Zapco DC 750.2 for sub
Zapco DC 350.2 for front stage

all controled by a Zapco DRC-SL in the glovebox

2 and a half bulk kits of hushmat as well....

next few months i will be doing a different sub setup and finishing the system

adding my Zapco competition 4" mids in the kicks and switching over to Scan Speak Tweeters in the A-Pillars running off my Zapco DC 1000.4

it should be a nice little SQ competition Rig

[Closer]

2006 Access cab
HU: Clarion CX501
Polk MM6501's & MM651's in doors
2 8" Polk MM840's in qlogic box.
Polk PA5000.5 amp
Stinger sound deadening may add some more later.
All the hard work is done just need to put in the deck and hook up the amp.

[cwhealon78]

2005 dc
Pioneer z130 headunit
JL zr 8" mid's and zr tweeters front doors
JL c3 6.5 rear doors
JL 13" w5 flat sub under rear seat custom fiberglass box after alot of modification to storage compartment
JL 300/4 slash amp for doors
JL 750/1 hd amp for sub
Stinger 10 farad hybrid capacitor
Die hard platinum battery under the hood
Dynamat in all doors and whole rear floor next is the whole floor

Still working on wrapping the box in the same grey suede as my headliner and building an amp rack on the back wall will post pics when it's all done

[axle]

2000 Access Cab
HD pioneer V400
Everything else stock
It's terrible and can't wait to upgrade.