Re: Programming power locks
My 2002 says close all doors, shifter in park, push power lock switch to the unlock position, turn the ignition switch to the on position, within 10 seconds push and hold the power lock switch to the lock position for about 5 sec. Open door warning light will flash to indicate the mode.
One flash - All doors locked when taken out of park,
Two flashes - all auto functions cancelled ,
Three flashes - doors lock when taken out of park and unlock when put back in park,
Four flashes -all door locked when taken out of park Doors unlock when drivers door is opened within 10 seconds after the ignition is turned to the "acc" or the key is removed.
Hope this helps.
|