Leveling a 2002 Tundra 4WD Access Cab
Posted 07-25-2009 at 10:30 PM by Wesley Horn
Forgive me, I know this topic has probably been talked about at nausea; but I have a 2002 Tundra that I put Daystar spacers on about 5 or 6 years ago, when the truck was fairly new. I wanted to level the truck and I think it lifted the front about 1 3/4 inches. Still did not level the truck; so I lowered the rear an inch to level it. Results are the ride sucks and now I am thinking about the ready lift kit for the front because it doesn't compress the coils and effect the factory ride. My question is; how many inches should I go in the front just to level my truck (after I raise the rear back to stock height). Thanks in advance; I've been away from Tundra Solutions for several years and I'm hoping someone out there has the answer.
Total Comments 2
Comments
|
leveling a tundraHey, i used a 2" lift kit 4yrs. ago, still level, i will look for name of mfg. if you need it..tundrapatriot
|
 
|
|
|
2001 Limited Access cabHello all , have had my Tundra since late 2004 best vehicle i've ever purchased, has all original paint,swapped out the single exhaust for a Lou's custom duel oval tip,sounds nice. hope to hear from ya. tundrapatriot
|
|
|
Recent Blog Entries by Wesley Horn
- Leveling a 2002 Tundra 4WD Access Cab (07-25-2009)
