Tundra Rear Brake Tutorial - Toyota Tundra Forums : Tundra Solutions Forum

MEvang · #1 (**permalink**) 10-27-2008, 08:17 AM

These instructions with pictures were originally posted by member anhn27 on 11-15-07. in this thread: Braking Shudder (Its not the rotors)HELP!!!
I have had many request for these instructions. dufftatkinson has recently posted these instructions in another post as a PDF.
I am re-posting this PDF here and making it a sticky so all can find it easily.
Hope you find this helpful. Thanks to all of you that put this togther

Mike

piperstan · #2 (**permalink**) 01-31-2009, 12:02 PM

Mike - That was an excellent tutorial on the tundra rear brake - thanks. Do you have a similar tutorial for the front brakes? I have a 2003 LTD 4x4 50,000 miles with front upgrade at 11000 miles - I am thinking about doing the front brakes myself. Is the 4x more difficult that a standard hub? I tried to find a haynes but none in the local shops there is a 2002 available but not sure if this is different from the 2003?

Thanks

Stan

MEvang · #3 (**permalink**) 01-31-2009, 05:18 PM

Stan, check out the write up here How To: Early Tundra Brake Upgrade
If your just installing pads you don't need to remove the calipers just pull the pins and push the pistons back in using the old pads, other detail you will need is in the write up.
Mike