Power locks 2001 camary

[ZipperZazz]

Hi

Does anyone have a picture or mechanical drawing of the power lock motor linkage to the front passenger side door.

Problem: When I power lock the doors from anyone of the doors (including the front passenger side), the doors lock and also open except for the front passenger side. So I know that the electrical to the front passenger door works. I removed the door panel and checked the wiring to the open/lock motor and it looks ok. It is very hard to see and get my hands inside the door to follow the linkage to where it meets up with the open / lock motor. There appears to be some sort of plastic shroud over the motor as well. I know the motor is kinda working because when I activate the door switch and my hand is on the motor (or shroud), I can feel in turn on and off. It's just so small of a space that I can't see or get my hands in there to find the manual linkage to see if it is connected to the lock.

Any suggestions on how to tackle this ? Should I try to remove the assembly ? and if so, How ?

right now, I have to manually open or lock the door from the inside or use the key from the outside.

I'm pretty dangerous and have worked on all sorts of mechanical / electrical stuff so I'm not afraid to do this I would just like to know if any of you have any recommendations so I don't make this into a major project.

Thanks in advance

Stan