Question Front side curtain airbag cover - Toyota Tundra Forums : Tundra Solutions Forum

eadblu · #1 (**permalink**) 06-24-2009, 12:00 AM

The driver side front pillar airbag cover on my 2007 Camry is falling off or loosening every time I drive a bumpy road. I just push it back but will come loose again. Has anyone had that problem? I heard that there is a TSB out on this to replace a clip. What is the TSB number?

njerald · #2 (**permalink**) 06-24-2009, 10:00 PM

Quote:

Originally Posted by eadblu

The driver side front pillar airbag cover on my 2007 Camry is falling off or loosening every time I drive a bumpy road. I just push it back but will come loose again. Has anyone had that problem? I heard that there is a TSB out on this to replace a clip. What is the TSB number?

BO015-06 RH INTERIOR A-PILLAR GARNISH LOOSE
7/28/2006 - 2007 model year NAP-built Camry vehicles produced BEFORE the Production Change Effective VINs shown

Some customers may complain that the right side interior A-pillar garnish is loose or out of position. This condition is caused by an incomplete installation of the A-pillar garnish at the factory. Follow the repair procedure in this bulletin to correct this condition.

BO017-03 TRIM GARNISH LOOSE (REVISED)
4/24/2006 - 1991 – 2007 model year Toyota vehicles.

Customers may experience an interior trim panel either loose or fitting poorly due to a deformed or missing panel attachment clips. When a trim garnish (A, B, C, or D pillar garnish, door trim panel, etc.) is removed and reinstalled using the old clips, there is a possibility that the garnish may exhibit a loose condition. To prevent this condition from occurring, please use the following procedures.

bassvax · #3 (**permalink**) 09-11-2009, 10:06 PM

Thanks I have the same problem on the same vehicle. Dealer acted dumb about it and this is the second time I have asked them to do something about it. I bought the extended warranty but this seems to be a design/installation defect and therefore should be covered by the manufacturer (which means if there is a TSB on it the dealer should do the work and the manufacturer should reimburse the dealer).

Anywho...anyway to access that TSB without paying for it? So I could fix it myself?

Thanks!