Brandon1

jmdsurf45 · #1 (**permalink**) 03-18-2008, 10:45 AM

When using Duragloss #105, are you using the bonding agent #601? And does the #105 need to cure? I've used the Menzerna products that you recomended but have just been using the Natty's blue to finish it usually because of time. I've just been doing sections and have only completed the bed. The weather has been horrible here with only a few days of sunshine before it rains again.

Brandon1 · #2 (**permalink**) 03-18-2008, 02:28 PM

I dont use #601, just #105. I let it cure for 30min at least, sometimes I let it sit overnight, but thats usually when I get to tired to finish

Menzerna with #105 with Natty's Blue should be a ultimate combo on black!

cmb · #3 (**permalink**) 03-18-2008, 02:59 PM

Till Brandon can chime in , last time I spoke to Jerry from Duragloss, one of my questions was about how long to wait till I wax the pre-polish and polish combo in cooler temps.Bonding agent first (105) , then top it with the 601 polish, right on top of the 105, no need to wait.After 12 hours or so when the paint ''pops'', (you'll see it), wax it with 951 Aquawax, spray it on, wipe it off, then buff with another microfiber cloth.Great thing about the 951 is you don't have to worry about keeping it off of trim because theres no white mess to get off as with regular wax.I've heard the new Ice wax is like that too.I'm always ready to learn more so I'll be watchin' for Brandon to reply

Brandon1 · #4 (**permalink**) 03-18-2008, 03:12 PM

CMB, I think you may have your #'s confused. #601 is the bonding agent, and 105 is the sealant.

If I did use it, i'd use #601 then #105 right over top of it. Then apply Aquawax over both after an hour or so.

jmdsurf45 · #5 (**permalink**) 03-18-2008, 03:38 PM

Thanks Brandon! I been using it without the bonding agent just read on autogeek that Duragloss recommended it. Which wash mitts are you referring to on your list? I was looking for them on autogeek.

Brandon1 · #6 (**permalink**) 03-18-2008, 03:53 PM

Any good wash mitt will work. I use the Schmitts, but you can use anything you'd like.

cmb · #7 (**permalink**) 03-19-2008, 04:29 AM

Thanks Brandon, I went out and looked before posting so I wouldn't get the numbers mixed up

Didn't help, I'm starting to think maybe the last few braincells I had died alone and cold!