You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Electrical & Computer SystemsDetails discussions regarding electrical components, wiring, all lighting, wire harnesses and HID conversion for your vehicle.
This is a discussion thread titled "Adding Keyless entry on my 2000 tundra", within the Electrical & Computer Systems forum, part of the Technical & Vehicle Assistance Forums category.
im trying to put a keyless entry in my tundra. it has power door locks, but not sure if it has factory keyless entry since i never recieved a key fob with car purchase. not sure if that would matter. i have the wire diagram as having unlock(-) = red/yellow, lock(-) = white/green, and child safety(-) = blue/black. i diode isolated the the unlock and child safety wires. the location is in the drivers door harness. where is that? behind the switch in the door?i followed the wires coming out of the door and down by the kickpanel. this is where i made my connection. after the connection i press the lock button and measure that the wire gets ground but the motors dont activate. What am i doing wrong?
Sorry I can't offer you any help, however I would like to do the same to my 01 that did not come with power locks. Did you buy a factory system or an aftermarket one? What was the cost? Keep us posted on how it is coming.
Hal
im trying to put a keyless entry in my tundra. it has power door locks, but not sure if it has factory keyless entry since i never recieved a key fob with car purchase. not sure if that would matter. i have the wire diagram as having unlock(-) = red/yellow, lock(-) = white/green, and child safety(-) = blue/black. i diode isolated the the unlock and child safety wires. the location is in the drivers door harness. where is that? behind the switch in the door?i followed the wires coming out of the door and down by the kickpanel. this is where i made my connection. after the connection i press the lock button and measure that the wire gets ground but the motors dont activate. What am i doing wrong?
The brand of keyless that you are installing does it want the unlock & lock wires or the lock/unlock motor wires?
__________________ ~Glenn~
Forum Rules
Searching for an answer to your Tundra or other Toyota question? search HERE!
Got a question 'bout TS.com site policy? click HERE!
Ready to create a new thread? WATCH THIS VIDEO FIRST.
Mine came with power locks (I bought it used in Jan 03) but no openers as delivered to the original owner. I added a Toyota factory RS3000 VIP alarm kit that included the opener fobs, glass breakage sensor, etc. Bought it on ebay for a price I was satisfied with from a Toyota dealer. I wanted the alarm system and the openers were a bonus.
Larry
__________________
2004 Tundra V8 Limited Access Cab 4X4 , Auto Dim Comp/Temp Mirror, Aero Turbine #2525 muffler, Access Roll Up Cover, Optima D31A battery, Multi-Vex adaptive outside mirrors, Eclipse AVN5510 Nav unit and Sirius SIR-ECL1 tuner as of 10/07 pictures in my photo gallery
If a combo of all these whizz bangs met their claims you'd have to syphon gas out of your tank every second day and sell the excess horsepower on the third????
It just has the unlock and lock wires that activate the relays( Only 250-500 ma). They should just tie into the switch. Maybe the relays need more than 250ma.
Quote:
Originally Posted by nhparrot
The brand of keyless that you are installing does it want the unlock & lock wires or the lock/unlock motor wires?
It just has the unlock and lock wires that activate the relays( Only 250-500 ma). They should just tie into the switch. Maybe the relays need more than 250ma.
Door Lock 3 Wire(-) White/Green Left Kick Panel
Door Unlock 3 Wire(-) Red/Yellow Left Kick Panel
Door Trigger(-) White/Blue Driver's Door Harness
Lock Motor Blue/White Driver's Door Harness
Unlock Motor Black/Yellow Driver's Door Harness
__________________ ~Glenn~
Forum Rules
Searching for an answer to your Tundra or other Toyota question? search HERE!
Got a question 'bout TS.com site policy? click HERE!
Ready to create a new thread? WATCH THIS VIDEO FIRST.
TundraSolutions.com is a registered trademark of Tundra Solutions, Inc.
Other trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the TundraSolutions.com User Agreement and Privacy Policy.
Adding Keyless entry on my 2000 tundra
Linear Mode
