New JBA y-pipe for Tundra

v8Toilet · #1 (**permalink**) 02-24-2003, 09:32 PM

In the TS performance banner above there is listed a JBA EVOL Y-PIPE for 2000 - 2003 Toyota Tundra 4.7L V8 2010Y. Does anyone know anything about this pipe or have a picture?

BT-22 · #2 (**permalink**) 02-26-2003, 12:19 AM

This is what I found:

http://www.truckperformance.com/vehi...sf5=ACCESS+CAB

http://www.truckperformance.com/disp..._9300k_500.jpg

Hope that helps!

Dude Boy · #3 (**permalink**) 02-26-2003, 02:50 AM

Quote:

Originally posted by Black-Tundra-22
This is what I found:

http://www.truckperformance.com/vehi...sf5=ACCESS+CAB

http://www.truckperformance.com/disp..._9300k_500.jpg

Hope that helps!

Quote:

This picture is a representation of the product and may not be the actual application photo for your vehicle.

They must not have a picture of a Tundra kit.

v8Toilet · #4 (**permalink**) 02-26-2003, 04:25 PM

Here is the link http://www.store.yahoo.com/tundrasol...evyfor202.html

KLS · #5 (**permalink**) 02-26-2003, 11:37 PM

$105 from Dr. Gas
http://www.drgas.com/street-cat.html

Ken

TundraSoul · #6 (**permalink**) 02-26-2003, 11:51 PM

I do, and here's a picture.

Quote:

Originally posted by v8Toilet
In the TS performance banner above there is listed a JBA EVOL Y-PIPE for 2000 - 2003 Toyota Tundra 4.7L V8 2010Y. Does anyone know anything about this pipe or have a picture?

tremo · #7 (**permalink**) 02-28-2003, 12:24 AM

Quote:

Originally posted by v8Toilet
Here is the link http://www.store.yahoo.com/tundrasol...evyfor202.html

Doesn't it seem strange that the Y-pipe is nearly 1/2 the cost of a set of JBA headers or their EVOL exhaust system? I would think $150 max for the Y-pipe would be reasonable, not $220 bucks. My .02 cents, FWIW...

Jim.

punisher · #8 (**permalink**) 02-28-2003, 09:41 AM

anyone know if it is stainless steel?

v8Toilet · #9 (**permalink**) 02-28-2003, 03:47 PM

Yeah it's a little too expensive and to be honest I don't see it giving me enough of a gain in low-end torque to justify $220.

punisher · #10 (**permalink**) 02-28-2003, 05:36 PM

anyone know if it is stainless or not? Lon, if it is, I will be in for one

asoltan · #11 (**permalink**) 02-28-2003, 09:39 PM

What kind of performance gains can you expect from the custom Y-pipe? Does anybody have one on their truck?

Dude Boy · #12 (**permalink**) 03-02-2003, 03:14 AM

This is a guess, but I think Tundra Jules has a neat one on his rig. You might check his photos.

Eddie · #13 (**permalink**) 03-02-2003, 10:59 AM

It looks like you'll have to cut off and weld on your 3rd cat or resonator (depending on the state you live in) onto that Y pipe.

I found this photo of jbtoy's Y-pipe,I remember TundraJules having pics too,but I guess he deleted them. Jules used a universal Flowmaster Y with a 3" outlet if I'm not mistaken.

BT-22 · #14 (**permalink**) 03-02-2003, 01:50 PM

Bassani just came out with a stainless steel true dual that eliminates the y pipe.

I'm thinking of buying this, does anyone know if it will have any adverse effects?

It's a 2in-2out bolt on w/o y-pipe.