You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Engine & DrivetrainDiscussions about the engine and drivetrain of your vehicle.
This is a discussion thread titled "Things Needed for TRD Header Install", within the Engine & Drivetrain forum, part of the Technical & Vehicle Assistance Forums category.
I bought a used pair of V8 TRD headers and am thinking about just bringing them to a muffler shop to get installed. All I have are the two headers and the two flanges that need to be welded on. Is there anything else I would need before bringing this to a muffler shop to be installed? I appreciate the help and advice.
TRD supplied a set of gaskets with the headers. Have your dealer order you a set of gaskets from TRD. You shouldn't need any bolts. The muffler shop can reuse the studs and nuts from your exhaust manifolds.
Rick
__________________
Black 2002 Limited 4x4
Mods: TRD Supercharger, Boost Guage, Unichip, Clifford AvantGuard 4 Alarm/Remote Start system, Auto Dimming mirror w/compass & temp, Sequoia Power Antenna, Retrax bed cover, Donahoe long travel coilovers, Total Chaos Uniball UCA, Helo Black Maxx 6 wheels w/ 265/70R 16 Michelin LTX/MS tires, Ivan Stewart front bumper cover, TRD headers, TRD dual exhaust, factory LSD, Total Chaos urethane steering rack bushings, Wheelers urethane front swaybar bushings, Helwig rear antisway bar, Goodyear Gatorback serpentine belt, Fumoto engine oil drain valve,Denso IK22 Iridum spark plugs, Eclipse AVN2454 AM/FM/CD/DVD/Navigation system w/ color backup camera, SilverStar headlights and fog lights, WeatherTec in-channel wind/rain deflectors, Ventshade door sill protectors, Toyota hood protector, TracRac sliding rack system with cantilever extension, IPOD integrated with Eclipse AVN2454, PopnLock electric tailgate lock, Sequoia electric condenser fan, Viair 440P portable compressor, ORS manual hub conversion w/Aisin hubs, StubbsWelding SKO rock sliders, 60" hi-lift extreme jack with slider adapter, Odyssey PC1700MJT battery
Coming hopefully - Warn 9.5ti multi-mount transportable winch, ARB lockers front and rear, 4.30 gears
TundraSolutions.com is a registered trademark of Tundra Solutions, Inc.
Other trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the TundraSolutions.com User Agreement and Privacy Policy.
Things Needed for TRD Header Install
Linear Mode
