Programming Keyless Entry - Toyota Tundra Forums : Tundra Solutions Forum

mml4 · #1 (**permalink**) 05-16-2006, 12:13 PM

Anyone know if you can program extra key fobs without going to the dealer?
Thanks,
Marc

nhparrot · #2 (**permalink**) 05-16-2006, 12:17 PM

Usually - what system/model year/model.

What is the FCC # on the fob, what vehicle & vehicle year

mml4 · #3 (**permalink**) 05-16-2006, 12:38 PM

FCC ID:HYQ12BBX
IC:1551A-12BBX
Lock And Unlock Buttons on the front,red panic on the back
no led on the fob
2007 FJ Cruiser

Thanks,
Marc

nhparrot · #4 (**permalink**) 05-16-2006, 02:25 PM

The procedure is outlined in the Service Manual and does not require special tools. Up to 4 fobs can be registered.

mml4 · #5 (**permalink**) 05-18-2006, 07:18 PM

Hi Glenn-
Could you please confirm if the correct procedure for the FJ is the one listed on pages DL-85 through DL88., in the manual. I was given copies of those pages but don't know if it is the FJ Cruiser manual. The text is under the heading:
2. Register Recognition code manual operation.
The page says DOOR LOCK-door control transmitter module.This is printed at the top above the black line.
Thanks,
Marc

nhparrot · #6 (**permalink**) 05-19-2006, 05:35 AM

Those are the instructions

mml4 · #7 (**permalink**) 05-19-2006, 06:05 AM

Thanks Glenn!!
Marc

RacerDre · #8 (**permalink**) 09-02-2006, 05:42 PM

i dont have a service manual. so how do you program the remote?

oscar8373 · #9 (**permalink**) 10-23-2006, 06:13 PM

programming remote transmitter hyq12bbx

fhp6 · #10 (**permalink**) 11-20-2007, 09:15 PM

Anyone had the problem on the 07 FJ where the keyless transmitter nor the auto lock will lock the rear door? Mine is not working unless I use the key to lock or unlock the rear door?
I also would like to have the procedure for reprogramming the HYQ12BBX if someone has them and cares to post the instructions.
Thank you,
Mike

fhp6 · #11 (**permalink**) 11-27-2007, 10:00 AM

Quote:

Originally Posted by fhp6

Anyone had the problem on the 07 FJ where the keyless transmitter nor the auto lock will lock the rear door? Mine is not working unless I use the key to lock or unlock the rear door?
I also would like to have the procedure for reprogramming the HYQ12BBX if someone has them and cares to post the instructions.
Thank you,
Mike

Responding to myself for others to benefit:-)
Took my FJ to the dealer and after a 3 hour wait was informed the rear door ECU was faulty. Part ordered should fix the problem.
Semper fi,
Mike

ppurcell · #12 (**permalink**) 12-14-2007, 05:29 PM

Quote:

Originally Posted by mml4

Hi Glenn-
Could you please confirm if the correct procedure for the FJ is the one listed on pages DL-85 through DL88., in the manual. I was given copies of those pages but don't know if it is the FJ Cruiser manual. The text is under the heading:
2. Register Recognition code manual operation.
The page says DOOR LOCK-door control transmitter module.This is printed at the top above the black line.
Thanks,
Marc

Can the procedure on those pages be shared? I have a remote that I need to program for my FJ.

Thanks,

Phil

delmar22 · #13 (**permalink**) 06-12-2008, 10:59 PM

Quote:

Originally Posted by nhparrot

Those are the instructions

Hello , I am in the same situation.
Could you also help me to reprogram my transmitter to FJ?
How could I get instruction??
Please advise.

Thanks
Zach