FS: KMC 18" wheels

cajuntundra · #1 (**permalink**) 10-09-2008, 08:54 PM

I have a set (4) of KMC wheels that I want to sell. One of the wheels is starting to flake, but it isn't to bad. They fit on the Fords with the 6 lug pattern. I would like to get $500 plus any shipping that is involved. I will email pics and as soon as I can figure out how to post them I will. Thanks.

fastmhz · #2 (**permalink**) 10-10-2008, 02:44 AM

This thread is worthless without pics.

cajuntundra · #3 (**permalink**) 10-11-2008, 11:03 AM

Here are the pics!!!

fastmhz · #4 (**permalink**) 10-11-2008, 11:07 AM

Where are you located?

cajuntundra · #5 (**permalink**) 10-11-2008, 04:24 PM

Scott, La, about 45miles west of Baton Rouge. Zip is 70583.

cajuntundra · #6 (**permalink**) 10-12-2008, 09:13 PM

Bump

...Some one has to know someone has to know someone that wants these things.

fastmhz · #7 (**permalink**) 10-12-2008, 09:15 PM

Do you have a picture of them on your truck or is this off of your buddy's Ford?

cajuntundra · #8 (**permalink**) 10-12-2008, 09:57 PM

I traded some tires for the rims and they won't fit on my truck. The lug pattern is a 6 hole but the hole for the hub isn't big enough to fit on the Toyota's hub. Thats why I said that the wheels were for the Ford F150s or Expedition or even the Explorers. I don't know what the exact backspacing is if you want I will measure the hub hole so you can have diameter of the hole.

671Tundra · #9 (**permalink**) 10-12-2008, 10:57 PM

If the lug pattern is a 6x5.5 but with the smaller bore/hub, then it's most likely for a Chevy / GM maybe even a Nissan. From what I remember, the Ford has a different 6 lug pattern. Just letting you know..... Nice looking wheels though. Also, maybe a machine shop can open up the bore for you.

cajuntundra · #10 (**permalink**) 10-13-2008, 12:40 PM

I tried that, they said that the hub hole bored out would be a safety issue. They were only going to charge me $150- $200.Other than that they would have fit. They came off a Ford F-150 it was an 06 or 07.

671Tundra · #11 (**permalink**) 10-13-2008, 07:34 PM

Quote:

Originally Posted by cajuntundra

I tried that, they said that the hub hole bored out would be a safety issue. They were only going to charge me $150- $200.Other than that they would have fit. They came off a Ford F-150 it was an 06 or 07.

If the wheels came off a ford then it wouldn't have fit your tundra regardless of the hub size because the lug pattern for the ford is a 6x135 and the lug pattern for your tundra is a 6x139.7 (6x5.5). Seems you've got taken for since the trade. Last post I promise... plus i'm helping you by bumping the ad to the top.

cajuntundra · #12 (**permalink**) 10-13-2008, 07:43 PM

The shop told me that they could have made it fit the problem would have been making the hub hole bigger. By doing that and adjusting the stud holes there would have been no wall in between the stud hole and the hub hole. I work at a tire shop so trading the tires for the rims isn't that bad for me, I'll get rid of them sooner or later. I just hope its sooner, thats why I posted them here. There has got to be someone on this site that owns or knows someone that these things will fit on........BUMP

cajuntundra · #13 (**permalink**) 10-15-2008, 10:48 AM

anybody???