You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
GPS and Navigation AssistanceOEM Car, Aftermarket and handheld navigation discussions.
This is a discussion thread titled "Navigation screen saver's...", within the GPS and Navigation Assistance forum, part of the Technical & Vehicle Assistance Forums category.
I've had a few people Pm me on where did I obtain my screen saver On my navi system on my current Tundra well Achilles (Ts member) added that on my Screen since i was helping him with his Pioneer z1 on his Crew max.
To Install this Mod:
1. First go to Circuit City and buy a thin sheet of plastic made for LCD screen's.
2.Next cut the plastic to fit your navi screen ( should be around 7')
3.Next get a bowl sit the plastic film in the bowl trying to get it wet just enought to get it to attach to the screen Like glue only water vs glue...
4.Next set the plastic on the screen and get a credit card to squeegee all the remaining water behind the plastic wipe all water (h20) off and your done...
Note this mod will not affect the touch screen operation in any shape or form and this mod has a cleaner screen without finger print's.
Erik
__________________
T3 Grill, Line X extra front Bumper coating
Erik,
Thanks for this information. I'm sure it'll be useful to everyone that has a nav (OEM or aftermarket). I wish I had seen this earlier, since I already ordered a screen protector on ebay for $12. Seemed a bit expensive for a thin sheet of plastic...but I'm sure it'll be worth it.
I've had a few people Pm me on where did I obtain my screen saver On my navi system on my current Tundra well Achilles (Ts member) added that on my Screen since i was helping him with his Pioneer z1 on his Crew max.
To Install this Mod:
1. First go to Circuit City and buy a thin sheet of plastic made for LCD screen's.
2.Next cut the plastic to fit your navi screen ( should be around 7')
3.Next get a bowl sit the plastic film in the bowl trying to get it wet just enought to get it to attach to the screen Like glue only water vs glue...
4.Next set the plastic on the screen and get a credit card to squeegee all the remaining water behind the plastic wipe all water (h20) off and your done...
Note this mod will not affect the touch screen operation in any shape or form and this mod has a cleaner screen without finger print's.
Erik
Tundra, I just stopped by a Circuit City and they didn't know what I was talking about when I asked for "thin plastic sheet made for LCD screens". By chance do you have the actual name of the product? I checked both Best Buy and Circuit City and they seem to only have small screen protectors for phone and PDA LCDs. Any suggestions would be welcome.
Navigation screen saver's...
Linear Mode
