avn 726e 06 DC tundra question

[sbeausol]

I'm considering upgrading my truck to the eclipse avn726e, but I have a question.

First, I noticed the sticky on the top of this forum about Navi Filler Trim L &R 00-06Tundra Mod. I know if I order from crutchfield, they include this Toyota/Scion In-dash Receiver Kit Fits select 2000-up models Chassis size DD at Crutchfield.com which is the Toyota-Scion-In-dash-Receiver-Kit. Has anyone had experience with this? Do it need a filler with the eclipse avn726e?

Thanks for any input!

[bstaley]

Originally Posted by sbeausol

I'm considering upgrading my truck to the eclipse avn726e, but I have a question.

First, I noticed the sticky on the top of this forum about Navi Filler Trim L &R 00-06Tundra Mod. I know if I order from crutchfield, they include this Toyota/Scion In-dash Receiver Kit Fits select 2000-up models Chassis size DD at Crutchfield.com which is the Toyota-Scion-In-dash-Receiver-Kit. Has anyone had experience with this? Do it need a filler with the eclipse avn726e?

Thanks for any input!

That's the kit I used with my AVN6620 and it looks great. It's needed for just about any double DIN Install because the stock hole in the dash is too wide.

[czechm8]

If you end up needing them, These are the Toyota part numbers for the spacers you will need on either side of the NAV unit.

86221-52060
86221-52050

There is a right and a left side.

It's good to know that Crutchfield finally has a kit for this. Before there were any kits, the above spacers are what we used. They do require some modification to fit, but they get the job done.