You are currently viewing our community as a guest, which gives you limited access to view most discussions and access our other features. By joining our Member Supported community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload photos, content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
GPS and Navigation AssistanceOEM Car, Aftermarket and handheld navigation discussions.
This is a discussion thread titled "Navigation/Radio Problem", within the GPS and Navigation Assistance forum, part of the Technical & Vehicle Assistance Forums category.
I bought a 2004 Camry today, and am trying to figure out the navigation system. I have been able to set up just abuot everything except the radio portion. All I am able to get when I push the FM or AM buttons are teh current station. I am not able to get to a screen where I can set any presets, nor can I change any of the current audio settings. I have read through the manual, but still could not figure it out. I am considering disconnecting the battery so that everything goes back to the factory defaults, but am hoping that there is an easier way. Thanks.
I bought a 2004 Camry today, and am trying to figure out the navigation system. I have been able to set up just abuot everything except the radio portion. All I am able to get when I push the FM or AM buttons are teh current station. I am not able to get to a screen where I can set any presets, nor can I change any of the current audio settings. I have read through the manual, but still could not figure it out. I am considering disconnecting the battery so that everything goes back to the factory defaults, but am hoping that there is an easier way. Thanks.
Tune to the station you want with the knob at the top right of the stereo. Then press the desired memory position you want it stored to... remove your finger when it beeps. Wha-la... your new presets are done.
I would really like to have presets to choose from. However, the only thing I get when I push the FM button is the current station. The same applies for the AM stsations. I can not get to the screen with the six presets as shown in the book to set any of them. All I ever get to see is teh navigation screen. How do I get the screen that shows the preset choices so I can set them?
I am re-organizing my pictures, please PM me if you find dead pictures and I'll fix it. Also, I don't have many pics in my account here, best place to view my truck is on photobucket: Here is my photobucket account: LINK
I played with the radio some more this morning. After pushing on the Audio button numerous times and many different ways, I finally was able to get to teh radio screen so that I could set a few presets. The source of the problem is a defective Audio button. I will have to check with the dealer and find out if it is still covered under warranty. The car has less than 35k miles on it. At least now I know what the problem is. Thanks for the help.
TundraSolutions.com is a registered trademark of Tundra Solutions, Inc.
Other trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the TundraSolutions.com User Agreement and Privacy Policy.
Navigation/Radio Problem
Its a hardware button, not a "touch" screen button
Linear Mode
