You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Group BuysMember approved Group Buys only forum.
This is a discussion thread titled "OPEN GROUP BUY: Access cab window latches", within the Group Buys forum, part of the Marketplace Forums category.
$30.00 a set (Two windows) Made from T-6 Aluminum and black anodized. Plus shipping.
Taking orders now. And I will ship in 4-6 weeks. So figure $35 bucks all together.
Orders will be taken until July 14th.
After I get my set I will write detailed installation instructions with photos.
After this group buy I will have these available on ebay for $50 dollars plus shipping so I would get 'em now!
PM me and I will give you all my information for payment and shipping info.
Thanks for being patient!
Josh Sims
P.S. This is for the part the breaks only. Not the entire window latch.
$30.00 a set (Two windows) Made from T-6 Aluminum and black anodized. Plus shipping.
Taking orders now. And I will ship in 4-6 weeks. So figure $35 bucks all together.
After I get my set I will write detailed installation instructions with photos.
After this group buy I will have these available on ebay for $50 dollars plus shipping so I would get 'em now!
PM me and I will give you all my information for payment and shipping info.
Thanks for being patient!
P.S. This is for the part the breaks only. Not the entire window latch.
SO you are making them?
Is this why you bought the CNC machine? And it bit back also I read on Socal Tundras(How's the truck?)
__________________
03' Access Cab Toyota Tundra V-8 4.7L, 4x4
305/70/16 BFG Muds on 4" B/S Wheelers' Offroad Steel Rims
Donahoe Racing Coilovers (cranked 2.5")
Total Chaos Upper Control Arms and Rack Bushings.
Bilstien 5100 rears'
ARB Sahara Bumper with Fog Light Kit and KC SlimLites in Front
Is this why you bought the CNC machine? And it bit back also I read on Socal Tundras(How's the truck?)
Yes, they are in the process of being machined right now. No, the machine I was towing is a CNC lathe. And these parts are made on a Haas CNC mill. Body shop says I should get my truck back tuesday..... man i miss it.
Myself and about 60 other people posted on the other thread that we are in. Now how do we go about arranging this. Should we be all be sending you PM's? Or will you PM everyone on the other thread so we know where to send the payment? Or would you like us to sent a check along with the return shipping info., then you can just ship them out when you get our payments? How exactly do you want this to work?
/Mike
__________________
2001 2WD Silver Tundra: 4x4 TRD springs, Daystar 1", Carson AAL, red/blue Bilsteins, 265/75 Revo's, IS kit(minus bumper) and rims(hand polished), RF851X amp, Alpine HU, JL 6.5"XR comps, Qlogic with JL 8W3V2 subs. 176k miles and counting......
2005 Silver Sienna LE with 12" Overhead DVD
Will be sending my check off in next day or so. Also, need to know how you remove this piece.
Like stated before, when the first set comes off the mill, I will be test fitting them on my truck to ensure proper fit and write a detailed instruction process.
Like stated before, when the first set comes off the mill, I will be test fitting them on my truck to ensure proper fit and write a detailed instruction process.
OPEN GROUP BUY: Access cab window latches
Linear Mode
