We're at 13 sets of rotors and 14 sets of pads now.....
I want to remind anybody that hasn't ordered yet that the buy window for the Group Buy pricing closes this Saturday afternoon. Raceshopper is open to 1:00pm edt on Sat. and to 8:00pm edt Monday-Friday.....
Remember... These prices are only good if we get 20 orders of rotors and pads......
And if you guys need another incentive....
SP Performance has just recently raised their wholesale prices to their dealers like Raceshopper. Edwin @ Raceshopper will honor all GB pricing for our deal with them..... NO CHANGES.....
What that means to us is that after the GB is completed, the Tundra/Sequoia front slotted rotors will be retailing at Raceshopper for $197.38 vice their current retail of $193.79. GB price is $155.51. The Diamond/slotted or Drilled/slotted will go up to $218.32 vice the current retail price of $200.55. GB price is $165.01.
This will be the lowest pricing we will ever be offered for these rotors......
Got my order in Monday. Chris at Raceshopper was very helpful.
Ken
__________________
You get what you inspect
Not what you expect.
S&S Long Tube Hi-Torque Headers
TRD/Eaton Limited Slip Differential
Gibson exhaust system
Hellwig Rear Antisway Bar
Sylvania Xenarc H.I.D. X1010 Auxiliary Low Beam Driving Lights
Schaeffer Engine Oil, ATF, Differential Oil
Racor LFS22825 full-flow transmission filter
Towing a 21' Bigfoot trailer using a Hensley Arrow hitch, Jordan brake controller, McKesh mirrors
Come on guys, some of you may not need new brakes + rotors right now, but think about the future! You'll be damn happy if you ordered them now through the group buy instead of waiting to buy them when the time does come to change your brakes + rotors. YOU'LL SAVE MORE NOW THAN IN THE FUTURE.
Oh Jack, um btw, if we did place our order and we don't happen to reach our GB min limit, does that mean we'll get charged retail price?
Got my order in Monday. Chris at Raceshopper was very helpful.
Ken
Right on, Ken...
We've had you, Chrislloyd, Sid325, Spanky, Blender, Devo (2 pads only) , Healey858, Jefemente, JT's02Tundra, Trouthead, WATundra, Yellbird and myself (2 sets) call in their orders so far....... Thanks guys....
I have another 13 names that, at one time, expressed interest in joining us in buying rotors/pads. I think we should be able to get at least 7 more sets ordered from this group.........
Again, I'd like to remind people that the buy window closes this Saturday at 1:00pm edt when Raceshopper closes for the day....
Oh Jack, um btw, if we did place our order and we don't happen to reach our GB min limit, does that mean we'll get charged retail price?
Let's not jinx this GB...
All I can say is that the people who call in their orders for the GB will be the only ones that WILL get a consideration of different prices other than the higher retail pricing going in effect.....
Where are you guys getting speed bleeders for the rear? All the web sites I go to only list them for the front.
Hey Mike,
Here's KLS' reply for the rear brakes...
"You need five bleeders. Three 7mm for the fronts and the rear proportioning valve. Two 10mm for the rear wheel cylinders."
Just tell Raceshopper that you need a set of 10mm for the rear brakes. The GB price is $8.45 a set if you order any rotors and/or pads... You still in w/us..? JB
"You need five bleeders. Three 7mm for the fronts and the rear proportioning valve. Two 10mm for the rear wheel cylinders."
Just tell Raceshopper that you need a set of 10mm for the rear brakes. The GB price is $8.45 a set if you order any rotors and/or pads... You still in w/us..? JB
Are you sure I need 7mm for the front? I have not had the TSB done and the Russel part number for speed bleeder for Tundra front is 639560 which is a 10mm. I'm ready to place my order as soon as I know for sure which bleeders to get.
Thanks
__________________
INTERIOR:Stock premium Head Unit to David Navone n-774v LOC ,U.S. Acoutics USB-4065 to M.B. Quart DSD 216 separates in front and Rockford Fosgate HPC-2206's in rear. JBL 300.1 mono amp feeding a Q-Logic sub box with Rockford Fosgate RFP-4208 8" subs.EXTERIOR:Boss 305 w]heels with Falken 265/50-20's, Billet Alluminum Grill.PERFORMANCE:SP slotted rotors with HAWK HPS brake pads and Super Blue brake fluid.
Are you sure I need 7mm for the front? I have not had the TSB done and the Russel part number for speed bleeder for Tundra front is 639560 which is a 10mm. I'm ready to place my order as soon as I know for sure which bleeders to get.
Thanks
Well.....
I just spoke w/someone @ Speed Bleeder and was told that all 2000 to 2003 Tundras have 10mm sizes for BOTH front and back brakes. The 2004 Tundras are showing up w/a 7mm size front and 10mm size back on their application chart. (Which they said can be not acurate sometimes...)
Front brake TSB is to install the late-2003 calipers. These are the ones with the 7mm bleeder threads. I think the majority of 2003 Tundras and Sequioas had the new-style calipers. The proportioning valve has always had 7mm.
Ken
__________________
You get what you inspect
Not what you expect.
S&S Long Tube Hi-Torque Headers
TRD/Eaton Limited Slip Differential
Gibson exhaust system
Hellwig Rear Antisway Bar
Sylvania Xenarc H.I.D. X1010 Auxiliary Low Beam Driving Lights
Schaeffer Engine Oil, ATF, Differential Oil
Racor LFS22825 full-flow transmission filter
Towing a 21' Bigfoot trailer using a Hensley Arrow hitch, Jordan brake controller, McKesh mirrors
Just paced my order @ RaceShopper. Ed says we only need a few more orders to make our quota.
__________________
INTERIOR:Stock premium Head Unit to David Navone n-774v LOC ,U.S. Acoutics USB-4065 to M.B. Quart DSD 216 separates in front and Rockford Fosgate HPC-2206's in rear. JBL 300.1 mono amp feeding a Q-Logic sub box with Rockford Fosgate RFP-4208 8" subs.EXTERIOR:Boss 305 w]heels with Falken 265/50-20's, Billet Alluminum Grill.PERFORMANCE:SP slotted rotors with HAWK HPS brake pads and Super Blue brake fluid.
I asked a Toyota tech (THANKS, Victor...!!!) on the site about which size is needed for the Tundras/Sequoias... Here's his reply...
The new TSB calipers and 03 and later-
They are all 7MM =tundras and sequoias
They use a 10mm wrench to open them, but have 7mm thread sizes
The 01 sequoia i checked has the same 7mm size, so i would say probably they were all 7mm threads with a 10mm wrench to open them
The 05 tundra is also the same
hope this helps
victor
7 sets to go......AND 3 DAYS LEFT TO BUY....
Linear Mode
