Looking for pics of Line X uses (NON bedliner)

cleanb13 · #1 (**permalink**) 03-13-2008, 08:49 AM

I'd like to Line X or paint the hood, fenders, grille, and bumper. Similar look to having a "bra" on the truck. I have stonechips that are starting to rust. If you have pics of Line X or other coatings being used for this, please post them. I'm looking for ideas on what to do. Thanks

Fissile · #2 (**permalink**) 03-15-2008, 01:53 AM

Theres a guy near where I work that has his entire super duty Dodge Ram sprayed with line-x. I don't have any pictures but I'll try and snap one if I see him around.

123Gone · #3 (**permalink**) 03-17-2008, 02:32 PM

Entire vehicle with LINE-X Xtra:

Entire vehicle with LINE-X Xtra (gray color match):

Before:

After:

Vern10 · #4 (**permalink**) 03-17-2008, 07:55 PM

How do you wash that thing? When I get a lot of dirt/mud in the bed of my Line-X'ed truck, i need to scrub it with a brush and some Ajax. Is there a better way than that?

123Gone · #5 (**permalink**) 03-18-2008, 08:32 AM

All of the pics I posted are LINE-X Xtra, which is easier to clean than regular LINE-X. Clean Xtra with automotive soap and water, you won't need a scrub brush.

If you get regular LINE-X really dirty, you may need to give it a scrub with a brush, but I've never used Ajax. After you clean it and it drys, apply some Just Once (justonce.com) or 303 Aerospace. Not only will those help the liner keep its color, but will also help it clean up easier next time around.

cleanb13 · #6 (**permalink**) 03-18-2008, 10:44 AM

What would the prep involve to do the entire vehicle? What would the approximate cost be for the Xtra?

TUNDRA786 · #7 (**permalink**) 03-19-2008, 04:19 PM

Quote:

Originally Posted by cleanb13

What would the prep involve to do the entire vehicle? What would the approximate cost be for the Xtra?

Ive always wanted to know the approx on how much it would cost to do an entire vehicle.

123Gone · #8 (**permalink**) 03-19-2008, 04:56 PM

Keep in mind that dealers are free to set their own prices. Depending on the size of the vehicle, you're looking at about $2,000 to $2,800.

Using a rubber floor as a template, we created a LINE-X floor. What you see here is all LINE-X that will be placed in the truck and will cover the entire floor. Pretty neat, eh?
http://img.photobucket.com/albums/v4...one/Floor1.jpg

Burger Steak & Eggs · #9 (**permalink**) 03-20-2008, 06:42 PM

Is there a way to control the gloss / flatness of the finish? Suppose someone wanted something done in flat black without any gloss, is this possible?

apimpdad · #10 (**permalink**) 03-22-2008, 03:51 PM

Quote:

Originally Posted by 123Gone

Keep in mind that dealers are free to set their own prices. Depending on the size of the vehicle, you're looking at about $2,000 to $2,800.

Using a rubber floor as a template, we created a LINE-X floor. What you see here is all LINE-X that will be placed in the truck and will cover the entire floor. Pretty neat, eh?
http://img.photobucket.com/albums/v4...one/Floor1.jpg

i really like the floor, i have been looking for something like that for a while. whats the approx. price on the floor job?

Tundradrenalin · #11 (**permalink**) 03-29-2008, 08:27 PM

I got a question about line-x'ing the 05-06 Tundra lower front bumper. The foglights are recessed, would you be able to apply line-x and still be able to remove the lights? If the lights come out the back, disregard this question

Tundrav8yamaha · #12 (**permalink**) 03-29-2008, 09:01 PM

Quote:

Originally Posted by Tundradrenalin

I got a question about line-x'ing the 05-06 Tundra lower front bumper. The foglights are recessed, would you be able to apply line-x and still be able to remove the lights? If the lights come out the back, disregard this question

the light come out the back would u like to see that pict. Yes preped mine today

Tundrav8yamaha · #13 (**permalink**) 03-29-2008, 09:52 PM

Tundradrenalin · #14 (**permalink**) 03-29-2008, 10:01 PM

bondo'ing looks good so far

Tundrav8yamaha · #15 (**permalink**) 03-29-2008, 10:08 PM

Quote:

Originally Posted by Tundradrenalin

bondo'ing looks good so far

I used to work in the Auto Body a long time ago and not too bad for 2 hr's worth of work..I'll be done with it tommorrow and Off to Line X it goes..Final pictures will be showen on another thread..

ahh the T3 grill sounds nice