How do you clean the inside of the Toyota logo?

[Desertnate]

Odly enough, my Sequoia is the first vehicle I have owned where the manufacturer logo is not one solid piece.

How do you clean the inside of the logo? I have tried tooth brushes, wadding my clay bar into a little point, q-tips, rags...everything I can think of, but I still can't clean right up against the inside edges of the logo.

What do you all do? Apperently the previous owner never realy tried

[JaredPointer]

A toothpick wrapped in a micro fibre towel works wonders for me, as does Poorboy's Spray & Wipe waterless wash and a few Q-tips.

[RobertT3]

Originally Posted by Desertnate

Odly enough, my Sequoia is the first vehicle I have owned where the manufacturer logo is not one solid piece.

How do you clean the inside of the logo? I have tried tooth brushes, wadding my clay bar into a little point, q-tips, rags...everything I can think of, but I still can't clean right up against the inside edges of the logo.

What do you all do? Apperently the previous owner never realy tried

I use q-tips to work around and inside the Toyota Logo edges..works pretty good...I spray some quick detailer on the logo or on the q-tip and work around it..it always worked for me....

[rx7vert]

a boar's hair brush can work wonders... if it has that brown gunk built up in it, dilute some super purple or orange degreaser 5:1 and spray that in and work it around and rinse. only do 1 letter at a time though, you do NOT want that degreser to sit on the paint for long at all... be very careful if you do use that method...


you can also use a medium cut polisher such as poorboy's ssr2.5 and work that around in there with a q tip or microfiber... it will help break up the gunk...

[zgw8]

Or you could just debadge!