Raod Armor & LC 100 !!

[LC Man]

Hi All,


I liked very much the Road Armor Bumpers and I talked to the guys throw their web site but, they don't make any bumpers for LC 100 =(

I would like to know from anyone who can tell us if there is a way to fix Tundra bumper that the Road Armor made for Tundra !! on LC 100

I hope to get a reply for this issue


Thanks a lot

[jamesjr4750]

Originally Posted by LC Man

Hi All,


I liked very much the Road Armor Bumpers and I talked to the guys throw their web site but, they don't make any bumpers for LC 100 =(

I would like to know from anyone who can tell us if there is a way to fix Tundra bumper that the Road Armor made for Tundra !! on LC 100

I hope to get a reply for this issue


Thanks a lot

They're not out yet so you'll have to wait until someone can measure it.

[firetruck41]

They are completely different chassis, so I doubt anything will line up/fit. Look at ARB, TJM, Slee Offroad, for real protection for a 100 series.

[LC Man]

Hi There,


I got some measurements for FJ from Road Armor Company:


The area measured width between brackets (side to side) both inside to inside and outside to outside = inside to inside is 28” outside to outside is 38.5”.

Measures from the back side of the front face to the back face of the mounting bracket = that measurement is aprox. 7”

The face of the weld in bracket itself is 5.25” side to side.


The aprox. measurements for the bracket are as follows:


1.) front to back length = 9.25”

2.) frame span width = 3.625”

3.) top to bottom front face of bracket = 6.625”

4.) side to side width of front face = 2.5”


I hope these measurements can help you guys to say if it can be fixed or not


Thanks a lot