Re: negative battery cable disconnected
1. Turn the ignition switch to the “ON” position.
2. Push and hold the moon roof switch to the “TILT UP” side or the “SLIDE–CLOSE” side until the following cycle of the moon roof operation is completed:
A. Closing
B. Fully tilt up
C. Fully tilt down
D. Fully slide open
E. Fully slide close
3. After the cycle of operation above is completed, initialization is complete.
4. Check for proper operation of the “one–touch slide open and close” and “one–touch tilt up and down” functions by pushing the switch briefly to the “SLIDE OPEN” and “TILT UP” positions.
__________________
~Glenn
|