Henry T

I think if you search the audio board you will find some help with this. You have to remove the housing for the 3rd b light to run the wire under the light. You need to pull the headliner down in the back and remove 2 10mm nuts. They are almost impossible to see and you must work by feel for the most part. Be sure and not over tighten them when re installing. A deep well socket is needed cause there are long posts the nuts are on. Some say just loosening the nuts worked for them, not for me. Its a PITA but worth it. Search audio for more tips on this.

How did you remove the rear brake light cover? I looked at it when I installed my Sirius radio. Removed the two screws and pulled but it didn't seem to want to come out. Did you pull it or pry it. I have my antenna under the front speaker cover and the reception it weak at best. Any help or suggestions would be great. By the way nice looking truck.

How is that ToyTec lift working for ya? Noticed any differences in the way it drives? Looks nice... you should post some pics! Woot!

Hi, they rubbed on the skid plate at full lock turn, did the bend it away trick and it does not rub anywhere now

Take care