mhadden

mhadden,

got a question about the 2 o-rings provided in the oil filter kit. where does the smaller o-ring go? i think the larger o-ring is on the outer cap but where does the smaller one go. i will be doing my first oil change in a couple of weeks. i dont want to get stuck with a drained truck and not knowing where to place the smaller o-ring.

thanks

Can't you guys see he has not been on sense4/8/08

By the way, mine is a 2008 grade but it DOES have the wiring.

Shawn

mhadden:

You did a very nice job installing the factory fog lights. I know it is straightforward and I may bite the bullet and do it but I keep waiting for an easy way to tap into the low amp side of the circuit, use the oem relay an fuse but put an independent switch in the dash.

In your opinion should I wait for someone to do it or replace the light switch?

Any thoughts are much appreciated in advance.

Shawn
Phoenix

Hello,

I did this mod thanks to you. Great info everything was as you said. Thanks again

hey man.....great write up on the door and mirror installs. Wondering where you found the mirror cover, or if you have a p/n for it. Did the handles last week and would really like to do my mirrors as well.

Thanks,
Ryan

hello,i saw your instructions on oem cruise.i have a 08 tundra 5.7 and it all looks the
same.my question is besides the wire i ordered that goes to the stalk and to the bottom of the air bag is there any other wire to hook up?thank you for any help.