Well I'm going to have a little time on my hands in late May so I've decided to sign up for one of Bill Burkes 'On the road...' 4x4 training classes. This one will be held on Saturday, May 30th and Sunday May 31st in the Pike National Forest, roughly southwest of Denver. We'll be starting out by meeting at a 4x4 shop in Englewood on Saturday morning, then heading out to the forest. The class is limited to 8 vehicles and I believe I'm the fourth to sign up. I've always wanted to have some kind of formal training and this opportunity has presented itself.
My daily driver - 2008 Vios 'S' sedan. Tinted windows in the rear, TRD anti-sway bar for the rear, 17" rims - Samurai SC02 Hyper Black. TRD lowering springs. Megan Racing header.
My favorite ride - a 2001 SR5 4x4. With - RCD 6" lift, JBA Titanium coated headers, JBA y-pipe, Unichip PnP, ARB rd-129 air locker (rear), Camburg UCA's, custom front Sway-A-Way coilovers, custom Sway-A-Way's with remote reservoirs and billet mounts for the hind-quarters, PolyPerformance limit straps with adjustable clevis's, Stubbs Welding rock sliders and custom front skid plate, 315/75/16 Toyo Open Country M/T's, on all 4 corners wrapped around 16x8 MB Motoring Blitz rims, cryo'd 4.88's set up by Inchworm Gear, Trenz billet grill upper, T-Rex billet grill lower, on board VI-AIR aircompressor and 3 gallon air tank, AutoMeter A-pillar pod with trans temp gauge (sending unit in the tranny pan), Long Tru-Cool LPD tranny cooler, 10" Flex-a-Lite tranny cooler fan w/thermostat, TRD billet oil filler cap, TRD air filter, TRD dual exhaust, and TRD add-a-leaf rear springs. Superlift TruSpeed Speedo Recalibrator. Warn Trans4mer system with a 9.5ti winch running Amsteel Blue winch line. Budbuilt traction bar. Staun tyre deflators. Spitz Lift portable crane. Marlin Crawler 1.5" wheel spacers. Our home away from home, 2004 Outback 26RS travel trailer with 15" MB Motoring Blitz rims to match the Tundra.
There may be a few people from this area, attending...give a call when you're in town, there will likely be a bunch of people willing to run some trails outside the class.
Will do. I'll probably take I-80 most of the way out, but I may expand my time away and visit a cousin in Casper, WY first. A slight detour. Then attend the weekend class, then return via I-70 and working my way towards Salt Lake City and back home via I-80 again. But wait! Isn't that Moab just south of I-70? I'm sure I would want to try out some of new mad skills on the trails! Hmmmmm. Man, this trip is gonna cost me with the Mrs.
__________________
My daily driver - 2008 Vios 'S' sedan. Tinted windows in the rear, TRD anti-sway bar for the rear, 17" rims - Samurai SC02 Hyper Black. TRD lowering springs. Megan Racing header.
My favorite ride - a 2001 SR5 4x4. With - RCD 6" lift, JBA Titanium coated headers, JBA y-pipe, Unichip PnP, ARB rd-129 air locker (rear), Camburg UCA's, custom front Sway-A-Way coilovers, custom Sway-A-Way's with remote reservoirs and billet mounts for the hind-quarters, PolyPerformance limit straps with adjustable clevis's, Stubbs Welding rock sliders and custom front skid plate, 315/75/16 Toyo Open Country M/T's, on all 4 corners wrapped around 16x8 MB Motoring Blitz rims, cryo'd 4.88's set up by Inchworm Gear, Trenz billet grill upper, T-Rex billet grill lower, on board VI-AIR aircompressor and 3 gallon air tank, AutoMeter A-pillar pod with trans temp gauge (sending unit in the tranny pan), Long Tru-Cool LPD tranny cooler, 10" Flex-a-Lite tranny cooler fan w/thermostat, TRD billet oil filler cap, TRD air filter, TRD dual exhaust, and TRD add-a-leaf rear springs. Superlift TruSpeed Speedo Recalibrator. Warn Trans4mer system with a 9.5ti winch running Amsteel Blue winch line. Budbuilt traction bar. Staun tyre deflators. Spitz Lift portable crane. Marlin Crawler 1.5" wheel spacers. Our home away from home, 2004 Outback 26RS travel trailer with 15" MB Motoring Blitz rims to match the Tundra.
There's a really good article in the 4WD toyota owner magazine I just got in the mail about Bill Burke and his school. Have fun!!!
__________________
2001 Tundra TRD Access Cab 4x4, SAW/Camburg coilovers, TC diff drop kit, Wheeler's Offroad AAL and Bilstein 5100's, LT265/75R16 BFG AT KO on Wheeler's black alloys, True Flow intake tube and filter with a modded air box, JBA titanium coated headers, Magnaflow 11226 muffler with stainless steel pipes and resonator removed, Skidrow front skidplate with custom made aluminum side shields, extended rear diff breather hose, Hawk LTS brake pads, Wheelers stainless brake hose kit, Helweig swaybar, Downey Offroad front swaybar link kit and cv joint boots,TRD "posi" 3rd member, debadged, backseat-power outlet-map lamp-taillight mod, Optima red top, TRD mirror covers painted flat black, Viair 300P air compressor, blacked out mouldings, bumpers and grille emblem
Exactly! I get the same mag. I contacted the 'Dirty Toy School' and they replied they don't have anymore classes lined up for 2009 due to the economy. The referred me to Bill Burke's web site and that's all she wrote!
I hope to have a blast and perhaps meet up with some of the Colorado boys while I'm in town.
__________________
My daily driver - 2008 Vios 'S' sedan. Tinted windows in the rear, TRD anti-sway bar for the rear, 17" rims - Samurai SC02 Hyper Black. TRD lowering springs. Megan Racing header.
My favorite ride - a 2001 SR5 4x4. With - RCD 6" lift, JBA Titanium coated headers, JBA y-pipe, Unichip PnP, ARB rd-129 air locker (rear), Camburg UCA's, custom front Sway-A-Way coilovers, custom Sway-A-Way's with remote reservoirs and billet mounts for the hind-quarters, PolyPerformance limit straps with adjustable clevis's, Stubbs Welding rock sliders and custom front skid plate, 315/75/16 Toyo Open Country M/T's, on all 4 corners wrapped around 16x8 MB Motoring Blitz rims, cryo'd 4.88's set up by Inchworm Gear, Trenz billet grill upper, T-Rex billet grill lower, on board VI-AIR aircompressor and 3 gallon air tank, AutoMeter A-pillar pod with trans temp gauge (sending unit in the tranny pan), Long Tru-Cool LPD tranny cooler, 10" Flex-a-Lite tranny cooler fan w/thermostat, TRD billet oil filler cap, TRD air filter, TRD dual exhaust, and TRD add-a-leaf rear springs. Superlift TruSpeed Speedo Recalibrator. Warn Trans4mer system with a 9.5ti winch running Amsteel Blue winch line. Budbuilt traction bar. Staun tyre deflators. Spitz Lift portable crane. Marlin Crawler 1.5" wheel spacers. Our home away from home, 2004 Outback 26RS travel trailer with 15" MB Motoring Blitz rims to match the Tundra.
What! Don't go to Colorado, you'll never come back LOL!! Sounds sweet, be sure to take many, many pics and be ready to share, we all want to see what we missed. Goodluck and have a safe trip.
What! Don't go to Colorado, you'll never come back LOL!! Sounds sweet, be sure to take many, many pics and be ready to share, we all want to see what we missed. Goodluck and have a safe trip.
Not possible, all the other Californians got here first, Highlands Ranch is full .
We're going to Moab the week after that, if you want to join us.
What! Don't go to Colorado, you'll never come back LOL!! Sounds sweet, be sure to take many, many pics and be ready to share, we all want to see what we missed. Goodluck and have a safe trip.
Thanks! I'm looking forward to the trip.
__________________
My daily driver - 2008 Vios 'S' sedan. Tinted windows in the rear, TRD anti-sway bar for the rear, 17" rims - Samurai SC02 Hyper Black. TRD lowering springs. Megan Racing header.
My favorite ride - a 2001 SR5 4x4. With - RCD 6" lift, JBA Titanium coated headers, JBA y-pipe, Unichip PnP, ARB rd-129 air locker (rear), Camburg UCA's, custom front Sway-A-Way coilovers, custom Sway-A-Way's with remote reservoirs and billet mounts for the hind-quarters, PolyPerformance limit straps with adjustable clevis's, Stubbs Welding rock sliders and custom front skid plate, 315/75/16 Toyo Open Country M/T's, on all 4 corners wrapped around 16x8 MB Motoring Blitz rims, cryo'd 4.88's set up by Inchworm Gear, Trenz billet grill upper, T-Rex billet grill lower, on board VI-AIR aircompressor and 3 gallon air tank, AutoMeter A-pillar pod with trans temp gauge (sending unit in the tranny pan), Long Tru-Cool LPD tranny cooler, 10" Flex-a-Lite tranny cooler fan w/thermostat, TRD billet oil filler cap, TRD air filter, TRD dual exhaust, and TRD add-a-leaf rear springs. Superlift TruSpeed Speedo Recalibrator. Warn Trans4mer system with a 9.5ti winch running Amsteel Blue winch line. Budbuilt traction bar. Staun tyre deflators. Spitz Lift portable crane. Marlin Crawler 1.5" wheel spacers. Our home away from home, 2004 Outback 26RS travel trailer with 15" MB Motoring Blitz rims to match the Tundra.
Well I've done a few more mods to my truck to make my upcoming trip more enjoyable and safer. I bought and installed a Clarion CX 609 head unit that has integrated Blue Tooth and will play music from a USB flash drive. I bought a 16 gig drive and I've only just started to load it with music. I may not hear the same song twice on the entire trip! The Blue Tooth works extremely well! I installed the microphone at the top of the 'A' pillar and the voice of the person I'm calling comes out of the speakers nice and clean. I'm very happy with the new head unit.
I also pulled the old spark plugs out and replaced them with NGK Iridiums. Several of the old plugs were barely finger tight in the socket! A number of the electrodes were noticebly worn and the gap was too big. Man, I guess it was time! Normally I do a better job of keeping track of things like this. The ol' gal runs soooo much better now! Nice and smooth. Maybe I'll even see a little gas mileage improvement. Anything would help at this point.
I also tracked down and fixed some minor exhaust leaks coming from the exhaust system. Some of the bolts had backed out between the sections. Tightened those sucka's back down and she sounds much better now.
Next up is replacing the rear diff fluid with some new stuff. I'm not doing synthetic here due to the possibilty of leaking past the axle seals. The earlier 1st gen Tundra's axle seals were not designed for synthetics. I know people are running synthetics in their rear diff's, but I'm not taking the chance, especially with such a long drive (1,200+ miles each way) coming up soon. I am going to replace the front diff fluid with Royal Purple synthetic since there are no axle seals to worry about. I changed the engine oil and filter last month, so they are fine. Plus I installed a new air filter.
I also replaced the original steel winch line with Amsteel Blue synthetic line (3/8" by 125'). It weighs about 35 lbs less then the steel line, is 45% stronger and is substantially SAFER than steel and is recommended by Bill Burke himself. Can't go wrong there. I also bought his two DVD's: Getting UNStuck and Getting PREPared. Just a little homework.
I put on new Toyo Open Country M/T's last December and they only have about 3,000 miles on them. So they are good to go.
I also noticed that she pulls slightly to the right, so I'll take her in for an alignment next week.
Then I will take her over to my Toyota mechanic buddy and have him give her the once over regarding belts, hoses and other misc. stuff.
Other than actually packing for the trip, the ol' Tundra is just about ready. Whew!
__________________
My daily driver - 2008 Vios 'S' sedan. Tinted windows in the rear, TRD anti-sway bar for the rear, 17" rims - Samurai SC02 Hyper Black. TRD lowering springs. Megan Racing header.
My favorite ride - a 2001 SR5 4x4. With - RCD 6" lift, JBA Titanium coated headers, JBA y-pipe, Unichip PnP, ARB rd-129 air locker (rear), Camburg UCA's, custom front Sway-A-Way coilovers, custom Sway-A-Way's with remote reservoirs and billet mounts for the hind-quarters, PolyPerformance limit straps with adjustable clevis's, Stubbs Welding rock sliders and custom front skid plate, 315/75/16 Toyo Open Country M/T's, on all 4 corners wrapped around 16x8 MB Motoring Blitz rims, cryo'd 4.88's set up by Inchworm Gear, Trenz billet grill upper, T-Rex billet grill lower, on board VI-AIR aircompressor and 3 gallon air tank, AutoMeter A-pillar pod with trans temp gauge (sending unit in the tranny pan), Long Tru-Cool LPD tranny cooler, 10" Flex-a-Lite tranny cooler fan w/thermostat, TRD billet oil filler cap, TRD air filter, TRD dual exhaust, and TRD add-a-leaf rear springs. Superlift TruSpeed Speedo Recalibrator. Warn Trans4mer system with a 9.5ti winch running Amsteel Blue winch line. Budbuilt traction bar. Staun tyre deflators. Spitz Lift portable crane. Marlin Crawler 1.5" wheel spacers. Our home away from home, 2004 Outback 26RS travel trailer with 15" MB Motoring Blitz rims to match the Tundra.
__________________
2001 Tundra TRD Access Cab 4x4, SAW/Camburg coilovers, TC diff drop kit, Wheeler's Offroad AAL and Bilstein 5100's, LT265/75R16 BFG AT KO on Wheeler's black alloys, True Flow intake tube and filter with a modded air box, JBA titanium coated headers, Magnaflow 11226 muffler with stainless steel pipes and resonator removed, Skidrow front skidplate with custom made aluminum side shields, extended rear diff breather hose, Hawk LTS brake pads, Wheelers stainless brake hose kit, Helweig swaybar, Downey Offroad front swaybar link kit and cv joint boots,TRD "posi" 3rd member, debadged, backseat-power outlet-map lamp-taillight mod, Optima red top, TRD mirror covers painted flat black, Viair 300P air compressor, blacked out mouldings, bumpers and grille emblem
Shoot me a PM with your #. Some of the NorCal people will be here this weekend too, I think...Nic, Mike & co.
PM sent!
__________________
My daily driver - 2008 Vios 'S' sedan. Tinted windows in the rear, TRD anti-sway bar for the rear, 17" rims - Samurai SC02 Hyper Black. TRD lowering springs. Megan Racing header.
My favorite ride - a 2001 SR5 4x4. With - RCD 6" lift, JBA Titanium coated headers, JBA y-pipe, Unichip PnP, ARB rd-129 air locker (rear), Camburg UCA's, custom front Sway-A-Way coilovers, custom Sway-A-Way's with remote reservoirs and billet mounts for the hind-quarters, PolyPerformance limit straps with adjustable clevis's, Stubbs Welding rock sliders and custom front skid plate, 315/75/16 Toyo Open Country M/T's, on all 4 corners wrapped around 16x8 MB Motoring Blitz rims, cryo'd 4.88's set up by Inchworm Gear, Trenz billet grill upper, T-Rex billet grill lower, on board VI-AIR aircompressor and 3 gallon air tank, AutoMeter A-pillar pod with trans temp gauge (sending unit in the tranny pan), Long Tru-Cool LPD tranny cooler, 10" Flex-a-Lite tranny cooler fan w/thermostat, TRD billet oil filler cap, TRD air filter, TRD dual exhaust, and TRD add-a-leaf rear springs. Superlift TruSpeed Speedo Recalibrator. Warn Trans4mer system with a 9.5ti winch running Amsteel Blue winch line. Budbuilt traction bar. Staun tyre deflators. Spitz Lift portable crane. Marlin Crawler 1.5" wheel spacers. Our home away from home, 2004 Outback 26RS travel trailer with 15" MB Motoring Blitz rims to match the Tundra.
The trip has begun! I left my home this morning at 7am local time and drove some 630 miles to Salt Lake City, UT. It took me about 10 1/2 hours with just a couple of stops. I have a motel room for one night, than I leave in the morning for Casper, WY to stay with my cousin and her husband until Friday afternoon. Then on to Englewood, CO which is just to the south of Denver. So far, so good!
__________________
My daily driver - 2008 Vios 'S' sedan. Tinted windows in the rear, TRD anti-sway bar for the rear, 17" rims - Samurai SC02 Hyper Black. TRD lowering springs. Megan Racing header.
My favorite ride - a 2001 SR5 4x4. With - RCD 6" lift, JBA Titanium coated headers, JBA y-pipe, Unichip PnP, ARB rd-129 air locker (rear), Camburg UCA's, custom front Sway-A-Way coilovers, custom Sway-A-Way's with remote reservoirs and billet mounts for the hind-quarters, PolyPerformance limit straps with adjustable clevis's, Stubbs Welding rock sliders and custom front skid plate, 315/75/16 Toyo Open Country M/T's, on all 4 corners wrapped around 16x8 MB Motoring Blitz rims, cryo'd 4.88's set up by Inchworm Gear, Trenz billet grill upper, T-Rex billet grill lower, on board VI-AIR aircompressor and 3 gallon air tank, AutoMeter A-pillar pod with trans temp gauge (sending unit in the tranny pan), Long Tru-Cool LPD tranny cooler, 10" Flex-a-Lite tranny cooler fan w/thermostat, TRD billet oil filler cap, TRD air filter, TRD dual exhaust, and TRD add-a-leaf rear springs. Superlift TruSpeed Speedo Recalibrator. Warn Trans4mer system with a 9.5ti winch running Amsteel Blue winch line. Budbuilt traction bar. Staun tyre deflators. Spitz Lift portable crane. Marlin Crawler 1.5" wheel spacers. Our home away from home, 2004 Outback 26RS travel trailer with 15" MB Motoring Blitz rims to match the Tundra.
The trip has begun! I left my home this morning at 7am local time and drove some 630 miles to Salt Lake City, UT. It took me about 10 1/2 hours with just a couple of stops. I have a motel room for one night, than I leave in the morning for Casper, WY to stay with my cousin and her husband until Friday afternoon. Then on to Englewood, CO which is just to the south of Denver. So far, so good!
Right on! Hows the weather been so far? Are you pulling your trailer? Have fun.
The weather's been great! No problems whatsoever. I arrived yesterday (about a 7 1/2 hour drive from Salt Lake City) in Casper along with some scattered thunder showers with hit and miss rain cells. Today I learned how to operate a John Deere 110 backhoe and front loader. Then rode around on my cousin's 4 wheeler. They have 13 acres of land so plenty of places to ride. I even 4'wheeled my truck to the top of their property. Good times! No trailer this time, that would have been too much! Tomorrow I head down to Englewood, CO. It's been a great trip so far.
__________________
My daily driver - 2008 Vios 'S' sedan. Tinted windows in the rear, TRD anti-sway bar for the rear, 17" rims - Samurai SC02 Hyper Black. TRD lowering springs. Megan Racing header.
My favorite ride - a 2001 SR5 4x4. With - RCD 6" lift, JBA Titanium coated headers, JBA y-pipe, Unichip PnP, ARB rd-129 air locker (rear), Camburg UCA's, custom front Sway-A-Way coilovers, custom Sway-A-Way's with remote reservoirs and billet mounts for the hind-quarters, PolyPerformance limit straps with adjustable clevis's, Stubbs Welding rock sliders and custom front skid plate, 315/75/16 Toyo Open Country M/T's, on all 4 corners wrapped around 16x8 MB Motoring Blitz rims, cryo'd 4.88's set up by Inchworm Gear, Trenz billet grill upper, T-Rex billet grill lower, on board VI-AIR aircompressor and 3 gallon air tank, AutoMeter A-pillar pod with trans temp gauge (sending unit in the tranny pan), Long Tru-Cool LPD tranny cooler, 10" Flex-a-Lite tranny cooler fan w/thermostat, TRD billet oil filler cap, TRD air filter, TRD dual exhaust, and TRD add-a-leaf rear springs. Superlift TruSpeed Speedo Recalibrator. Warn Trans4mer system with a 9.5ti winch running Amsteel Blue winch line. Budbuilt traction bar. Staun tyre deflators. Spitz Lift portable crane. Marlin Crawler 1.5" wheel spacers. Our home away from home, 2004 Outback 26RS travel trailer with 15" MB Motoring Blitz rims to match the Tundra.
Off road training class led by Bill Burke.
Re: Off road training class led by Bill Burke.
Man, this trip is gonna cost me with the Mrs. 
.
Linear Mode
